@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip VSC7514 Ethernet switch controller
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  The VSC7514 Industrial IoT Ethernet switch contains four integrated dual media
+  10/100/1000BASE-T PHYs, two 1G SGMII/SerDes, two 1G/2.5G SGMII/SerDes, and an
+  option for either a 1G/2.5G SGMII/SerDes Node Processor Interface (NPI) or a
+  PCIe interface for external CPU connectivity. The NPI/PCIe can operate as a
+  standard Ethernet port.
+
+  The device provides a rich set of Industrial Ethernet switching features such
+  as fast protection switching, 1588 precision time protocol, and synchronous
+  Ethernet. Advanced TCAM-based VLAN and QoS processing enable delivery of
+  differentiated services. Security is assured through frame processing using
+  Microsemi’s TCAM-based Versatile Content Aware Processor.
+
+  In addition, the device contains a powerful 500 MHz CPU enabling full
+  management of the switch.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: mscc,vsc7514-switch
+
+  reg:
+    items:
+      - description: system target
+      - description: rewriter target
+      - description: qs target
+      - description: PTP target
+      - description: Port0 target
+      - description: Port1 target
+      - description: Port2 target
+      - description: Port3 target
+      - description: Port4 target
+      - description: Port5 target
+      - description: Port6 target
+      - description: Port7 target
+      - description: Port8 target
+      - description: Port9 target
+      - description: Port10 target
+      - description: QSystem target
+      - description: Analyzer target
+      - description: S0 target
+      - description: S1 target
+      - description: S2 target
+      - description: fdma target
+
+  reg-names:
+    items:
+      - const: sys
+      - const: rew
+      - const: qs
+      - const: ptp
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+      - const: port4
+      - const: port5
+      - const: port6
+      - const: port7
+      - const: port8
+      - const: port9
+      - const: port10
+      - const: qsys
+      - const: ana
+      - const: s0
+      - const: s1
+      - const: s2
+      - const: fdma
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PTP ready
+      - description: register based extraction
+      - description: frame dma based extraction
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ptp_rdy
+      - const: xtr
+      - const: fdma
+
+  ethernet-ports:
+    type: object
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+        description: Ethernet ports handled by the switch
+
+        allOf:
+          - $ref: ethernet-controller.yaml#
+
+        properties:
+          '#address-cells':
+            const: 1
+          '#size-cells':
+            const: 0
+
+          reg:
+            description: Switch port number
+
+          phy-handle: true
+
+          mac-address: true
+
+        required:
+          - reg
+          - phy-handle
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    switch@1010000 {
+      compatible = "mscc,vsc7514-switch";
+      reg = <0x1010000 0x10000>,
+            <0x1030000 0x10000>,
+            <0x1080000 0x100>,
+            <0x10e0000 0x10000>,
+            <0x11e0000 0x100>,
+            <0x11f0000 0x100>,
+            <0x1200000 0x100>,
+            <0x1210000 0x100>,
+            <0x1220000 0x100>,
+            <0x1230000 0x100>,
+            <0x1240000 0x100>,
+            <0x1250000 0x100>,
+            <0x1260000 0x100>,
+            <0x1270000 0x100>,
+            <0x1280000 0x100>,
+            <0x1800000 0x80000>,
+            <0x1880000 0x10000>,
+            <0x1040000 0x10000>,
+            <0x1050000 0x10000>,
+            <0x1060000 0x10000>,
+            <0x1a0 0x1c4>;
+      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+            "port2", "port3", "port4", "port5", "port6",
+            "port7", "port8", "port9", "port10", "qsys",
+            "ana", "s0", "s1", "s2", "fdma";
+      interrupts = <18 21 16>;
+      interrupt-names = "ptp_rdy", "xtr", "fdma";
+
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+        };
+        port1: port@1 {
+          reg = <1>;
+          phy-handle = <&phy1>;
+        };
+      };
+    };
+
+...
+#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :

@@ -1,83 +0,0 @@
-Microsemi Ocelot network Switch
-===============================
-
-The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
-VSC7514)
-
-Required properties:
-- compatible: Should be "mscc,vsc7514-switch"
-- reg: Must contain an (offset, length) pair of the register set for each
-  entry in reg-names.
-- reg-names: Must include the following entries:
-  - "sys"
-  - "rew"
-  - "qs"
-  - "ptp" (optional due to backward compatibility)
-  - "qsys"
-  - "ana"
-  - "portX" with X from 0 to the number of last port index available on that
-    switch
-- interrupts: Should contain the switch interrupts for frame extraction,
-  frame injection and PTP ready.
-- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain
-  "ptp_rdy" which is optional due to backward compatibility.
-- ethernet-ports: A container for child nodes representing switch ports.
-
-The ethernet-ports container has the following properties
-
-Required properties:
-
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-
-Each port node must have the following mandatory properties:
-- reg: Describes the port address in the switch
-
-Port nodes may also contain the following optional standardised
-properties, described in binding documents:
-
-- phy-handle: Phandle to a PHY on an MDIO bus. See
-  Documentation/devicetree/bindings/net/ethernet.txt for details.
-
-Example:
-
-	switch@1010000 {
-		compatible = "mscc,vsc7514-switch";
-		reg = <0x1010000 0x10000>,
-		      <0x1030000 0x10000>,
-		      <0x1080000 0x100>,
-		      <0x10e0000 0x10000>,
-		      <0x11e0000 0x100>,
-		      <0x11f0000 0x100>,
-		      <0x1200000 0x100>,
-		      <0x1210000 0x100>,
-		      <0x1220000 0x100>,
-		      <0x1230000 0x100>,
-		      <0x1240000 0x100>,
-		      <0x1250000 0x100>,
-		      <0x1260000 0x100>,
-		      <0x1270000 0x100>,
-		      <0x1280000 0x100>,
-		      <0x1800000 0x80000>,
-		      <0x1880000 0x10000>;
-		reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
-			    "port2", "port3", "port4", "port5", "port6",
-			    "port7", "port8", "port9", "port10", "qsys",
-			    "ana";
-		interrupts = <18 21 22>;
-		interrupt-names = "ptp_rdy", "xtr", "inj";
-
-		ethernet-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port0: port@0 {
-				reg = <0>;
-				phy-handle = <&phy0>;
-			};
-			port1: port@1 {
-				reg = <1>;
-				phy-handle = <&phy1>;
-			};
-		};
-	};