[PATCH v3 17/25] dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
From: Dmitry Baryshkov <hidden>
Date: 2021-10-08 01:25:51
Also in:
linux-arm-msm, linux-gpio
Subsystem:
arm/qualcomm mailing list, open firmware and flattened device tree bindings, pin control subsystem, pin controller - qualcomm, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Bjorn Andersson, Linus Torvalds
Stop specifying individual interrupts properties. Use #interrupt-cells instead as we are switching qcom,spmi-mpp and qcom,ssbi-mpp to hierarchical IRQ setup. Signed-off-by: Dmitry Baryshkov <redacted> --- .../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 475733cabb02..35c846f59979 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml@@ -40,12 +40,10 @@ properties: reg: maxItems: 1 - interrupts: - minItems: 1 - maxItems: 12 - description: - Must contain an array of encoded interrupt specifiers for - each available MPP + interrupt-controller: true + + '#interrupt-cells': + const: 2 gpio-controller: true gpio-line-names: true
@@ -67,6 +65,7 @@ required: - gpio-controller - '#gpio-cells' - gpio-ranges + - interrupt-controller patternProperties: '-state$':
@@ -164,7 +163,8 @@ examples: gpio-ranges = <&pm8841_mpp 0 0 4>; gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL", "BT_LED_CTRL", "GPIO-F"; - interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>; + interrupt-controller; + #interrupt-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pm8841_default>;
--
2.30.2