Hello Arnd,

Giulio is in CC

On 10/24/21 3:32 PM, Arnd Bergmann wrote:

On Sun, Oct 24, 2021 at 5:40 PM Jesse Taube [off-list ref] wrote:

quoted

Add initial support for the i.MXRT10xx SoC family
starting with the i.IMXRT1050 SoC.
This patchset contains:
- i.MXRT10xx family infrastructure
- i.MXRT1050 pinctrl driver adaption
- i.MXRT1050 clock driver adaption
- i.MXRT1050 sd-card driver adaption
- i.MXRT1050 uart driver adaption
- i.MXRT1050-evk basic support

Can you expand the description a bit more so it makes sense as a changelog
text for the merge commit? It's fairly rare these days that we add support for a
MMU-less platform, so it would be good if the introductory text answers
questions like:

- what is this platform used for, and what is the purpose of running Linux on it
  in place of the usual RTOS variants?

- are you doing this just for fun, or are there any commercial use cases?

The purpose of this is for learning and fun, as far as we know there are no
commercial use cases, but we hope there will be.

- what are the minimum and maximum memory configurations this has
  been tested with?

We both have only tested with 32MB of ram on i.MXRT1050/60-evk.

- what user space are you testing with: any particular distro that supports
  this platform, and do you run elf-fdpic or flat binaries.

We are using Buildroot[1] and that only uses flat binaries.
i.MXRT1050/20 have already been up-streamed to U-Boot[2].

- are you planning to also support the newer i.MXRT11xx or
  Cortex-R based designs like the S32S?

We plan to support the i.MXRT11xx, but unsure about the S32x, it depends 
on the interest. 

       Arnd

[1]: https://github.com/Mr-Bossman/imxrt-linux-buildroot.git
[2]: https://source.denx.de/u-boot/u-boot/-/blob/master/configs/imxrt1050-evk_defconfig

Thank you, 
Jesse Taube.