[PATCH net-next 2/4] dt-bindings: net: dsa: inherit the ethernet-controller DT schema
STALE1808d
REVIEWED: 1 (1M)
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: 2021-10-18 19:30:46
Also in:
lkml, netdev
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v1 of 2 in this series; 1 review trailer.
Revisions (2)
- v1 [diff vs current]
- v1 current
Since a switch is basically a bunch of Ethernet controllers, just inherit the common schema for one to get stronger type validation of the properties of a port. For example, before this change it was valid to have a phy-mode = "xfi" even if "xfi" is not part of ethernet-controller.yaml, now it is not. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> --- Documentation/devicetree/bindings/net/dsa/dsa.yaml | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 224cfa45de9a..9cfd08cd31da 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml@@ -46,6 +46,9 @@ patternProperties: type: object description: Ethernet switch ports + allOf: + - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#" + properties: reg: description: Port number
--
2.25.1