Re: [PATCH v2 0/6] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards
From: Shawn Guo <shawnguo@kernel.org>
Date: 2021-10-16 07:50:17
Also in:
linux-arm-kernel, lkml
From: Shawn Guo <shawnguo@kernel.org>
Date: 2021-10-16 07:50:17
Also in:
linux-arm-kernel, lkml
On Fri, Oct 15, 2021 at 02:48:34PM +0200, Frieder Schrempf wrote:
From: Frieder Schrempf <redacted>
This is a set of enhancements and fixes for the devicetrees of the Kontron
SL/BL i.MX8MM SoMs and boards.
See the individual patches for more information and changelogs.
For v2, the review comments from Shawn ahve been taken into account
(thanks!) and the patches 7 and 8 have been dropped, as they were already
applied separately.
Frieder Schrempf (6):
arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on
SD card
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are
correct
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHYApplied all, thanks!