Add optional property 'select-delay' to add a delay when changing the
mux state. This is required on some platforms to allow GPIO signals to get
stablized.

Horatiu Vultur (2):
  dt-bindings: i2c-mux-gpio: Add optional DT property
  i2c: i2c-mux-gpio: Add support 'select-delay' property

 Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt | 1 +
 drivers/i2c/muxes/i2c-mux-gpio.c                       | 7 +++++++
 2 files changed, 8 insertions(+)

-- 
2.33.0