[PATCH v1 15/16] RISC-V: Add initial StarFive JH7100 device tree
From: Emil Renner Berthing <kernel@esmil.dk>
Date: 2021-10-12 13:43:01
Also in:
linux-clk, linux-gpio, linux-riscv, linux-serial, lkml
Subsystem:
risc-v architecture, starfive devicetrees, the rest · Maintainers:
Paul Walmsley, Palmer Dabbelt, Albert Ou, Emil Renner Berthing, Conor Dooley, Linus Torvalds
Add initial device tree for the StarFive JH7100 SoC. The CPU and cache data is based on the device tree in the vendor u-boot port. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> --- arch/riscv/boot/dts/starfive/jh7100.dtsi | 228 +++++++++++++++++++++++ 1 file changed, 228 insertions(+) create mode 100644 arch/riscv/boot/dts/starfive/jh7100.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
new file mode 100644
index 000000000000..ee3d23ef0fe8
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi@@ -0,0 +1,228 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2021 StarFive Technology Co., Ltd. */ +/* Copyright (c) 2021 Emil Renner Berthing <kernel@esmil.dk> */ + +/dts-v1/; +#include <dt-bindings/clock/starfive-jh7100.h> +#include <dt-bindings/reset/starfive-jh7100.h> + +/ { + compatible = "starfive,jh7100"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "sifive,u74-mc", "riscv"; + reg = <0>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + riscv,isa = "rv64imafdc"; + tlb-split; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu@1 { + compatible = "sifive,u74-mc", "riscv"; + reg = <1>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + riscv,isa = "rv64imafdc"; + tlb-split; + + cpu1_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + osc_sys: osc_sys { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + osc_aud: osc_aud { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + gmac_rmii_ref: gmac_rmii_ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* Should be overridden by the board when needed */ + clock-frequency = <0>; + }; + + gmac_gr_mii_rxclk: gmac_gr_mii_rxclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* Should be overridden by the board when needed */ + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clint: clint@2000000 { + compatible = "starfive,jh7100-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 + &cpu1_intc 3 &cpu1_intc 7>; + }; + + plic: interrupt-controller@c000000 { + compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9 + &cpu1_intc 11 &cpu1_intc 9>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + riscv,ndev = <127>; + }; + + clkgen: clock-controller@11800000 { + compatible = "starfive,jh7100-clkgen"; + reg = <0x0 0x11800000 0x0 0x10000>; + clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>; + clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk"; + #clock-cells = <1>; + }; + + rstgen: reset@11840000 { + compatible = "starfive,jh7100-reset"; + reg = <0x0 0x11840000 0x0 0x10000>; + #reset-cells = <1>; + }; + + i2c0: i2c@118b0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x118b0000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C0_CORE>, + <&clkgen JH7100_CLK_I2C0_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C0_APB>; + interrupts = <96>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@118c0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x118c0000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C1_CORE>, + <&clkgen JH7100_CLK_I2C1_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C1_APB>; + interrupts = <97>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gpio: pinctrl@11910000 { + compatible = "starfive,jh7100-pinctrl"; + reg = <0x0 0x11910000 0x0 0x10000>, + <0x0 0x11858000 0x0 0x1000>; + reg-names = "gpio", "padctl"; + clocks = <&clkgen JH7100_CLK_GPIO_APB>; + resets = <&rstgen JH7100_RSTN_GPIO_APB>; + interrupts = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart2: serial@12430000 { + compatible = "starfive,jh7100-uart", "snps,dw-apb-uart"; + reg = <0x0 0x12430000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_UART2_CORE>, + <&clkgen JH7100_CLK_UART2_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&rstgen JH7100_RSTN_UART2_APB>; + interrupts = <72>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@12440000 { + compatible = "starfive,jh7100-uart", "snps,dw-apb-uart"; + reg = <0x0 0x12440000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_UART3_CORE>, + <&clkgen JH7100_CLK_UART3_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&rstgen JH7100_RSTN_UART3_APB>; + interrupts = <73>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c2: i2c@12450000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12450000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C2_CORE>, + <&clkgen JH7100_CLK_I2C2_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C2_APB>; + interrupts = <74>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@12460000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12460000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C3_CORE>, + <&clkgen JH7100_CLK_I2C3_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C3_APB>; + interrupts = <75>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; +};
--
2.33.0