[PATCH 06/15] arm64: dts: qcom: msm8916-samsung-serranove: Add NFC
From: Stephan Gerhold <stephan@gerhold.net>
Date: 2021-09-28 17:21:41
Also in:
linux-arm-kernel, linux-arm-msm, phone-devel
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
The LTE version of the S4 Mini VE has a NXP PN547, which is supported by the nxp-nci-i2c driver in mainline. It seems to detect NFC tags using "nfctool" just fine, although more testing is difficult given there seem to be very few useful applications making use of the Linux NFC subsystem. :( Note that for some reason Samsung decided to connect the I2C pins to GPIOs where no hardware I2C bus is available, so we need to fall back to software bit-banging with i2c-gpio. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- .../dts/qcom/msm8916-samsung-serranove.dts | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 4a94158e7624..caeed942a4c5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts@@ -168,6 +168,32 @@ touchkey@20 { pinctrl-0 = <&tkey_default>; }; }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@2b { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x2b>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; + }; }; &blsp_i2c2 {
@@ -434,6 +460,30 @@ muic_irq_default: muic-irq-default { bias-disable; }; + nfc_default: nfc-default { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + + irq { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + nfc_i2c_default: nfc-i2c-default { + pins = "gpio0", "gpio1"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + tkey_default: tkey-default { pins = "gpio98"; function = "gpio";
--
2.33.0