Thread (1 message) read the whole thread 1 message, 1 author, 2021-09-20

Re: [PATCH RESEND v2 2/2] ASoC: dt-bindings: rt5682s: add bindings for rt5682s

From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2021-09-20 11:29:01
Also in: alsa-devel

On 07/09/2021 14:05, derek.fang@realtek.com wrote:
quoted hunk
From: Derek Fang <redacted>

Realtek ALC5682I-VS codec is a ALC5682I-VD variant which supports I2C only.

Signed-off-by: Derek Fang <redacted>
---
 .../bindings/sound/realtek,rt5682s.yaml       | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
new file mode 100644
index 000000000000..fbf23696f1a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5682s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek rt5682s codec devicetree bindings
+
+maintainers:
+  - Derek Fang <derek.fang@realtek.com>
+
+description: |
+  Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only.
+
+properties:
+  compatible:
+    const: realtek,rt5682s
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    description: The CODEC's interrupt output.
+
+  realtek,dmic1-data-pin:
+    enum:
+      - 0 # dmic1 data is not used
+      - 1 # using GPIO2 pin as dmic1 data pin
+      - 2 # using GPIO5 pin as dmic1 data pin
+
+Cc devicetree and Rob,

Guys,

This is really poor. The patch was never sent to devicetree maintainers
and does not build at all!

There are several errors here. I fixed few of them:
https://lore.kernel.org/lkml/20210920112106.140918-1-krzysztof.kozlowski@canonical.com/ (local)

but still you need to fix missing description for vendor fields.

Derek,
Your duty is to use get_maintainers.pl script to Cc all relevant
maintainers and mailing lists. Second duty is to test it. This was not
tested.

Best regards,
Krzysztof
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help