[PATCH v4 15/18] arm64: dts: imx8mm: put USB controllers into power-domains
STALE1788d
From: Lucas Stach <l.stach@pengutronix.de>
Date: 2021-09-10 20:27:07
Also in:
linux-arm-kernel
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Revision v4 of 5 in this series.
Revisions (5)
Now that we have support for the power domain controller on the i.MX8MM we can put the USB controllers in their respective power domains to allow them to power down the PHY when possible. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 3922f26f8fd4..772f60bfe31e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi@@ -1077,6 +1077,7 @@ usbotg1: usb@32e40000 { assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; + power-domains = <&pgc_otg1>; status = "disabled"; };
@@ -1096,6 +1097,7 @@ usbotg2: usb@32e50000 { assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; + power-domains = <&pgc_otg2>; status = "disabled"; };
--
2.30.2