[PATCH 9/9] arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: 2021-09-09 08:50:11
Also in:
linux-arm-kernel, linux-renesas-soc, netdev
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
Add compatible values to Ethernet PHY subnodes representing Realtek RTL8211E PHYs on RZ/G2 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/renesas/cat875.dtsi | 2 ++ arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index 801ea54b027c43d9..a69d24e9c61db052 100644
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi@@ -21,6 +21,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c915", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index dde3a07bc417c690..ad898c6db4e62df6 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi@@ -24,6 +24,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c915", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
--
2.25.1