Re: [PATCH 0/2] coresight: tmc: Add support to configure AXI burst size

Hi

Looks good from a driver  / hw perspective.
As long as the device tree people are happy with the binding then this
set seems OK to me.

Regards

Mike

On Wed, 1 Sept 2021 at 14:11, Tanmay Jagdale [off-list ref] wrote:

Add a new device tree parameter, "arm,max-burst-size" to configure
the max burst size that can be initiated by TMC-ETR on the AXI bus.

Also add description of this property in coresight documentation.

This patch series applies on top of the coresight next branch [1].
https://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux.git/log/?h=next

Tanmay Jagdale (2):
  dt-bindings: coresight: Add burst size for TMC
  coresight: tmc: Configure AXI write burst size

 .../devicetree/bindings/arm/coresight.txt     |  5 +++++
 .../hwtracing/coresight/coresight-tmc-core.c  | 21 +++++++++++++++++--
 .../hwtracing/coresight/coresight-tmc-etr.c   |  3 ++-
 drivers/hwtracing/coresight/coresight-tmc.h   |  6 +++++-
 4 files changed, 31 insertions(+), 4 deletions(-)

--
2.25.1

-- 
Mike Leach
Principal Engineer, ARM Ltd.
Manchester Design Centre. UK