[PATCH v7 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
From: Pali Rohár <pali@kernel.org>
Date: 2021-09-30 09:59:23
Also in:
linux-arm-kernel, linux-clk, linux-serial, lkml
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
This change defines DT node for UART clock "marvell,armada-3700-uart-clock" and use this UART clock as a base clock for all UART devices. Signed-off-by: Pali Rohár <pali@kernel.org> --- Changes in v6: * Do not disable uartclk by default * Rename node to clock-controller@12010 --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 9acc5d2b5a00..f9bfe73d8ec2 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi@@ -132,10 +132,20 @@ reg = <0x11500 0x40>; }; + uartclk: clock-controller@12010 { + compatible = "marvell,armada-3700-uart-clock"; + reg = <0x12010 0x4>, <0x12210 0x4>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", + "TBG-B-S", "xtal"; + #clock-cells = <1>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x18>; - clocks = <&xtalclk>; + clocks = <&uartclk 0>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -147,7 +157,7 @@ uart1: serial@12200 { compatible = "marvell,armada-3700-uart-ext"; reg = <0x12200 0x30>; - clocks = <&xtalclk>; + clocks = <&uartclk 1>; interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
--
2.20.1