Re: [PATCH v13 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description
From: Rob Herring <robh@kernel.org>
Date: 2021-09-24 01:00:27
Also in:
linux-arm-kernel, linux-gpio, linux-mediatek, lkml
On Wed, Sep 22, 2021 at 10:56:37AM +0800, Zhiyong Tao wrote:
quoted hunk ↗ jump to hunk
For supporting SI units in "bias-pull-down" & "bias-pull-up", Change pull up/down description Signed-off-by: Zhiyong Tao <redacted> --- .../bindings/pinctrl/pinctrl-mt8195.yaml | 65 ++++++++++++++++++- 1 file changed, 63 insertions(+), 2 deletions(-)diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml index 2f12ec59eee5..2f2afabbe4fc 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml@@ -85,9 +85,70 @@ patternProperties: 2/4/6/8/10/12/14/16mA in mt8195. enum: [0, 1, 2, 3, 4, 5, 6, 7] - bias-pull-down: true + bias-pull-down: + description: | + For pull down type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" + define in mt8195. + For pull down type is RSEL, it can add RSEL define & resistance value(ohm) + to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195.
Please make a schema:
oneOf:
- enum: [ 0, 1, ...7 ]
- description: MT8195...
enum: [ 5000, 75000 ]
+ An example of using RSEL define:
+ pincontroller {
+ i2c0_pin {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+ };
+ };
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel_resistance_in_si_unit;
+ }
+ pincontroller {
+ i2c0_pin {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-down = <75000>;
+ };
+ };
- bias-pull-up: true
+ bias-pull-up:
+ description: |
+ For pull up type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+ define in mt8195.
+ For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
+ to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+ & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+ & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+ define in mt8195. It can also support resistance value(ohm)
+ "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.Same here.
+ An example of using RSEL define:
+ pincontroller {
+ i2c0_pin {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+ };
+ };
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel_resistance_in_si_unit;
+ }
+ pincontroller {
+ i2c0_pin {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-up = <1000>;
+ };
+ };
bias-disable: true
--
2.25.1