[PATCH v2 3/4] arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
From: Bjorn Andersson <hidden>
Date: 2021-09-23 21:22:50
Also in:
linux-arm-msm, linux-pm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is used to connect thermal zones with ADC channels. Signed-off-by: Bjorn Andersson <redacted> --- Changes since v1: - New patch arch/arm64/boot/dts/qcom/pm8998.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 6f5bb6b37ec2..d09f2954b6f9 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi@@ -84,6 +84,16 @@ adc-chan@6 { }; }; + pm8998_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm-hc"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>;
--
2.29.2