[PATCH v2 00/11] gpio: msc313: Add gpio support for ssd20xd
From: Daniel Palmer <hidden>
Date: 2021-09-23 06:55:42
Also in:
linux-arm-kernel, linux-gpio, linux-leds, lkml
This is a little series to add a compatible string for the Sigmastar
SSD201 and SSD202D to the msc313 gpio driver, add the specific offsets
for the pins on these chips, and then a bunch of DT wiring stuff so
that the LEDs on the M5 stack unitv2 work and it can control the
power switch for the USB connected.
Changes since v1:
- Add a fix for the led binding to squash the warning about the
activity trigger in the unitv2 dts.
- Fix up the regulator node names so they pass dtb check
Daniel Palmer (11):
dt-bindings: gpio: msc313: Add compatible for ssd20xd
dt-bindings: gpio: msc313: Add offsets for ssd20xd
dt-bindings: leds: Document "activity" trigger
gpio: msc313: Code clean ups
gpio: msc313: Add support for SSD201 and SSD202D
ARM: dts: mstar: Set gpio compatible for ssd20xd
ARM: dts: mstar: unitv2: Wire up LEDs
ARM: dts: mstar: unitv2: Add core regulator
ARM: dts: mstar: unitv2: Add io regulator
ARM: dts: mstar: unitv2: Add DRAM regulator
ARM: dts: mstar: unitv2: Add wifi switch
.../bindings/gpio/mstar,msc313-gpio.yaml | 4 +-
.../devicetree/bindings/leds/common.yaml | 2 +
.../dts/mstar-infinity2m-ssd202d-unitv2.dts | 46 +++
.../boot/dts/mstar-infinity2m-ssd20xd.dtsi | 5 +
drivers/gpio/gpio-msc313.c | 266 +++++++++++++++++-
include/dt-bindings/gpio/msc313-gpio.h | 71 +++++
6 files changed, 389 insertions(+), 5 deletions(-)
--
2.33.0