Re: [PATCH 3/4] ARM: dts: imx: add devicetree for Kobo Libra H2O

Hi,

On Wed, 22 Sep 2021 09:41:39 +0200
Krzysztof Kozlowski [off-list ref] wrote:

[...]

quoted

+       pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {  

Thanks for the patch.

This does not look like passing the schema validation. Please run
dtbs_check. The node names should use hyphens and end with "grp"
suffix. This remark applies to other cases below.

dtbs_check reports a lot of errors originating from imx6sll.dtsi and
friends. But nothing added by me. But yes, node names should use
hyphens, that is documented. I will fix that.

But having -grp at the end for these things with a frequency in the
name is uncommon.
$ grep -R :.*100mhz arch/arm/boot/dts/imx6s*.dts
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
arch/arm/boot/dts/imx6sll-evk.dts:	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
arch/arm/boot/dts/imx6sll-evk.dts:	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts:	pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts:	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine3.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine3.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-vision5.dts:	pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-vision5.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-warp.dts:		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
arch/arm/boot/dts/imx6sl-warp.dts:		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts:	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
arch/arm/boot/dts/imx6sx-sabreauto.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts:	pinctrl_usdhc4_100mhz: usdhc4-100mhz {

Regards,
Andreas