On 20/09/2021 15:37, Tony Lindgren wrote:

Hi,

* Neil Armstrong [off-list ref] [210920 12:53]:

quoted

--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi

@@ -965,6 +965,26 @@ hdmi: encoder@0 {
 			};
 		};
 
+		target-module@59000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x59000020 0x4>;
+			reg-names = "rev";
+			clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000000 0x1000>;
+
+			bb2d: gpu@0 {
+				compatible = "vivante,gc";
+				reg = <0x0 0x0700>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+		};
+
 		aes1_target: target-module@4b500000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x4b500080 0x4>,

How about just use the default for the bb2d node with is "okay"?
That way there's no need set status = "okay" for each board file.

If there is no driver loaded, we idle the target-module anyways.

Yes you're right, I'll resend only this patch with no status property on bb2d node.

thanks,
Neil

Regards,

Tony