Re: [PATCH v5 0/4] arm64: meson: add support for JetHub D1/H1

Hi,

On Wed, 15 Sep 2021 11:57:11 +0300, Vyacheslav Bocharov wrote:

Add support for new home automation devices.

JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB LPDDR4
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE

[...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.16/dt64)

[1/4] dt-bindings: arm: amlogic: add bindings for Jethub D1/H1
      https://git.kernel.org/amlogic/c/c649e25c0fcd53e0f1e83f710fefbda9d2809c32
[2/4] dt-bindings: vendor-prefixes: add jethome prefix
      https://git.kernel.org/amlogic/c/a1732cca0ed3d1ac2a256d16302c93443d636146
[3/4] arm64: dts: meson-gxl: add support for JetHub H1
      https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607
[4/4] arm64: dts: meson-axg: add support for JetHub D1
      https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79

-- 
Neil