Re: [PATCH 1/3] clk: qcom: smd-rpm: Add rate hooks for clk_smd_rpm_branch_ops
From: Bjorn Andersson <hidden>
Date: 2021-09-15 17:22:26
Also in:
linux-arm-msm, linux-clk, lkml
On Wed 15 Sep 08:05 PDT 2021, Shawn Guo wrote:
On Tue, Sep 14, 2021 at 02:56:28PM -0700, Stephen Boyd wrote:quoted
Quoting Shawn Guo (2021-09-13 19:55:52)quoted
On QCM2290 platform, the clock xo_board runs at 38400000, while the child clock bi_tcxo needs to run at 19200000. That said, clk_smd_rpm_branch_ops needs the capability of setting rate. Add rate hooks into clk_smd_rpm_branch_ops to make it possible.This doesn't sound right. The branch is a simple on/off. If xo_board is 38.4MHz, then there is an internal divider in the SoC that makes bi_tcxo (i.e. the root of the entire clk tree) be 19.2MHz. We don't model the divider, I guess because it isn't very important to. Instead, we tack on a divider field and implement recalc_rate op. See clk-rpmh.c in the qcom directory for this.Thanks for the comment, Stephen! To be honest, I copied the implementation from vendor kernel, and wasn't really sure if it's correct or the best. So here is what I get based on your suggestion. Let's me know if it's how you wanted it to be. Thanks! Shawn ----8<--------- From 23dda79fee412738f046b89bdd20ef95a24c35cc Mon Sep 17 00:00:00 2001 From: Shawn Guo <redacted> Date: Wed, 15 Sep 2021 22:00:32 +0800 Subject: [PATCH] clk: qcom: smd-rpm: Add a divider field for branch clock Similar to clk-rpmh, clk-smd-rpm has the same need to handle the case where an internal divider is there between xo_board and bi_tcxo. The change is made in the a back compatible way below. - Add div field to struct clk_smd_rpm, and have __DEFINE_CLK_SMD_RPM_BRANCH() assign it. - Update all existing __DEFINE_CLK_SMD_RPM_BRANCH() wrappers to pass a zero div. - Add DEFINE_CLK_SMD_RPM_BRANCH_DIV() which doesn't take rate argument but div. - Update clk_smd_rpm_recalc_rate() to handle div and add it as .recalc_rate of clk_smd_rpm_branch_ops.
This looks good to me. And the confirmed that the xo_board in sdm630.dtsi (and hence SDM660) is wrong, it should be 38.4MHz as well. Unfortunately adding the appropriate divider to the sdm660 bcxo would break existing .dtsi (but we can probably convince the community that it would be ok, if we do it now). Regards, Bjorn
quoted hunk ↗ jump to hunk
Signed-off-by: Shawn Guo <redacted> --- drivers/clk/qcom/clk-smd-rpm.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index 66d7807ee38e..66ef0d3795fd 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c@@ -66,13 +66,14 @@ } #define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, \ - stat_id, r, key) \ + stat_id, r, key, _div) \ static struct clk_smd_rpm _platform##_##_active; \ static struct clk_smd_rpm _platform##_##_name = { \ .rpm_res_type = (type), \ .rpm_clk_id = (r_id), \ .rpm_status_id = (stat_id), \ .rpm_key = (key), \ + .div = (_div), \ .branch = true, \ .peer = &_platform##_##_active, \ .rate = (r), \@@ -92,6 +93,7 @@ .rpm_status_id = (stat_id), \ .active_only = true, \ .rpm_key = (key), \ + .div = (_div), \ .branch = true, \ .peer = &_platform##_##_name, \ .rate = (r), \@@ -112,7 +114,12 @@ #define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r) \ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, \ - r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE) + r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE, 0) + +#define DEFINE_CLK_SMD_RPM_BRANCH_DIV(_platform, _name, _active, type, r_id, \ + _div) \ + __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, \ + r_id, 0, 0, QCOM_RPM_SMD_KEY_ENABLE, _div) #define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id) \ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \@@ -121,12 +128,12 @@ #define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id) \ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \ - QCOM_RPM_KEY_SOFTWARE_ENABLE) + QCOM_RPM_KEY_SOFTWARE_ENABLE, 0) #define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \ - QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY) + QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY, 0) #define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)@@ -140,6 +147,7 @@ struct clk_smd_rpm { bool branch; struct clk_smd_rpm *peer; struct clk_hw hw; + u8 div; unsigned long rate; struct qcom_smd_rpm *rpm; };@@ -370,10 +378,10 @@ static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw, /* * RPM handles rate rounding and we don't have a way to - * know what the rate will be, so just return whatever - * rate was set. + * know what the rate will be, so just return divided parent + * rate or whatever rate was set. */ - return r->rate; + return r->div ? parent_rate / r->div : r->rate; } static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)@@ -416,6 +424,7 @@ static const struct clk_ops clk_smd_rpm_ops = { static const struct clk_ops clk_smd_rpm_branch_ops = { .prepare = clk_smd_rpm_prepare, .unprepare = clk_smd_rpm_unprepare, + .recalc_rate = clk_smd_rpm_recalc_rate, }; DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);-- 2.17.1