Re: [PATCH 2/2] dt-bindings: display: Add binding for LG.Philips SW43101
From: Rob Herring <robh@kernel.org>
Date: 2021-09-07 18:33:30
Also in:
dri-devel, lkml, phone-devel
On Wed, Sep 01, 2021 at 06:07:30PM +0000, Yassine Oudjana wrote:
quoted hunk ↗ jump to hunk
Add a device tree binding for LG.Philips SW43101. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> --- .../display/panel/lgphilips,sw43101.yaml | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yamldiff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml new file mode 100644 index 000000000000..da049e9f244e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml@@ -0,0 +1,52 @@ +# SPDX-License-Identifier: BSD-3-Clause
Not the right license(s). checkpatch.pl will tell you.
+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lgphilips,sw43101.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG.Philips SW43101 1080x1920 OLED panel + +maintainers: + - Yassine Oudjana [off-list ref] + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: lgphilips,sw43101
Looks like this can be added to panel-simple-dsi.yaml instead. Unless it has more than 1 power rail as you didn't document any.
+
+ port: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "lgphilips,sw43101";
+ reg = <0>;
+
+ reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
--
2.33.0