Re: [PATCH] dt-bindings: serial: brcm,bcm6345-uart: convert to the json-schema
From: Rob Herring <robh@kernel.org>
Date: 2021-08-24 14:27:58
Also in:
linux-serial
On Thu, Aug 19, 2021 at 03:48:59PM +0200, Rafał Miłecki wrote:
quoted hunk ↗ jump to hunk
From: Rafał Miłecki <rafal@milecki.pl> This helps validating DTS files. In example periph_clk@0 was replaced with periph_clk to fix validation. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- I've verified this binding using the make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml --- .../bindings/serial/brcm,bcm6345-uart.txt | 36 ------------ .../bindings/serial/brcm,bcm6345-uart.yaml | 57 +++++++++++++++++++ 2 files changed, 57 insertions(+), 36 deletions(-) delete mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yamldiff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt deleted file mode 100644 index 8b2b0460259a..000000000000 --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt +++ /dev/null@@ -1,36 +0,0 @@ -* BCM63xx UART - -Required properties: - -- compatible: "brcm,bcm6345-uart" - -- reg: The base address of the UART register bank. - -- interrupts: A single interrupt specifier. - -- clocks: Clock driving the hardware; used to figure out the baud rate - divisor. - - -Optional properties: - -- clock-names: Should be "refclk". - -Example: - - uart0: serial@14e00520 { - compatible = "brcm,bcm6345-uart"; - reg = <0x14e00520 0x18>; - interrupt-parent = <&periph_intc>; - interrupts = <2>; - clocks = <&periph_clk>; - clock-names = "refclk"; - }; - - clocks { - periph_clk: periph_clk@0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <54000000>; - }; - };diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml new file mode 100644 index 000000000000..0d4d03fc58ba --- /dev/null +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml@@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/brcm,bcm6345-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM63xx UART + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: brcm,bcm6345-uart + + reg: + maxItems: 1 + description: The base address of the UART register bank
Drop. Don't need generic descriptions.
+ + interrupts: + description: A single interrupt specifier
Replace with 'maxItems: 1'
+ + clocks: + description: > + Clock driving the hardware; used to figure out the baud rate divisor
Replace with 'maxItems: 1'
+
+ clock-names:
+ const: refclk
+
+unevaluatedProperties: false
+
+required:
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ };
+
+ clocks {
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <54000000>;
+ };You don't need to show the clock provider (or any other) in examples.
+ }; -- 2.26.2