RE: [PATCH v11 2/2] PCI: keembay: Add support for Intel Keem Bay

Hi Lorenzo,

-----Original Message-----
From: Lorenzo Pieralisi <redacted>
Sent: Friday, August 13, 2021 10:01 PM
To: Thokala, Srikanth <srikanth.thokala@intel.com>
Cc: robh+dt@kernel.org; linux-pci@vger.kernel.org;
devicetree@vger.kernel.org; andriy.shevchenko@linux.intel.com;
mgross@linux.intel.com; Raja Subramanian, Lakshmi Bai
[off-list ref]; Sangannavar, Mallikarjunappa
[off-list ref]; kw@linux.com; maz@kernel.org
Subject: Re: [PATCH v11 2/2] PCI: keembay: Add support for Intel Keem
Bay

On Fri, Aug 06, 2021 at 02:40:10AM +0530, srikanth.thokala@intel.com
wrote:

[...]

quoted

+static int keembay_pcie_add_pcie_port(struct keembay_pcie *pcie,
+				      struct platform_device *pdev)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	struct pcie_port *pp = &pci->pp;
+	struct device *dev = &pdev->dev;
+	u32 val;
+	int ret;
+
+	pp->ops = &keembay_pcie_host_ops;
+	pp->msi_irq = -ENODEV;
+
+	ret = keembay_pcie_setup_msi_irq(pcie);
+	if (ret)
+		return ret;

May I ask you (and DWC maintainers) please why we need to resort to
setting

pp->msi_irq = -ENODEV;

while we *could* (?) just use pp->ops->msi_host_init() (ie which I
believe can be keembay_pcie_setup_msi_irq() revisited ?)

I would like to understand how this choice can be made by a DWC
developer that has to add an incantation specific MSI logic handling
glue.

'pp->msi_irq = -ENODEV' is set to
1) Re-use DWC logic (as part of dw_pcie_host_init()) to create MSI domain and map MSI page
2) Register Keem Bay platform-specific MSI handler as IP has given additional registers to
control MSI interrupts.

Thanks!
Srikanth

Other than that we can merge this code but I would like to understand
the rationale behind the question above - it is not obvious to me.

Thanks,
Lorenzo

quoted

+
+	pcie->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(pcie->reset))
+		return PTR_ERR(pcie->reset);
+
+	ret = keembay_pcie_probe_clocks(pcie);
+	if (ret)
+		return ret;
+
+	val = readl(pcie->apb_base + PCIE_REGS_PCIE_PHY_CNTL);
+	val |= PHY0_SRAM_BYPASS;
+	writel(val, pcie->apb_base + PCIE_REGS_PCIE_PHY_CNTL);
+
+	writel(PCIE_DEVICE_TYPE, pcie->apb_base + PCIE_REGS_PCIE_CFG);
+
+	ret = keembay_pcie_pll_init(pcie);
+	if (ret)
+		return ret;
+
+	val = readl(pcie->apb_base + PCIE_REGS_PCIE_CFG);
+	writel(val | PCIE_RSTN, pcie->apb_base + PCIE_REGS_PCIE_CFG);
+	keembay_ep_reset_deassert(pcie);
+
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		keembay_ep_reset_assert(pcie);
+		dev_err(dev, "Failed to initialize host: %d\n", ret);
+		return ret;
+	}
+
+	val = readl(pcie->apb_base + PCIE_REGS_INTERRUPT_ENABLE);
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		val |= MSI_CTRL_INT_EN;
+	writel(val, pcie->apb_base + PCIE_REGS_INTERRUPT_ENABLE);
+
+	return 0;
+}
+
+static int keembay_pcie_probe(struct platform_device *pdev)
+{
+	const struct keembay_pcie_of_data *data;
+	struct device *dev = &pdev->dev;
+	struct keembay_pcie *pcie;
+	struct dw_pcie *pci;
+	enum dw_pcie_device_mode mode;
+
+	data = device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
+	mode = (enum dw_pcie_device_mode)data->mode;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pci = &pcie->pci;
+	pci->dev = dev;
+	pci->ops = &keembay_pcie_ops;
+
+	pcie->mode = mode;
+
+	pcie->apb_base = devm_platform_ioremap_resource_byname(pdev,

"apb");

quoted

+	if (IS_ERR(pcie->apb_base))
+		return PTR_ERR(pcie->apb_base);
+
+	platform_set_drvdata(pdev, pcie);
+
+	switch (pcie->mode) {
+	case DW_PCIE_RC_TYPE:
+		if (!IS_ENABLED(CONFIG_PCIE_KEEMBAY_HOST))
+			return -ENODEV;
+
+		return keembay_pcie_add_pcie_port(pcie, pdev);
+	case DW_PCIE_EP_TYPE:
+		if (!IS_ENABLED(CONFIG_PCIE_KEEMBAY_EP))
+			return -ENODEV;
+
+		pci->ep.ops = &keembay_pcie_ep_ops;
+		return dw_pcie_ep_init(&pci->ep);
+	default:
+		dev_err(dev, "Invalid device type %d\n", pcie->mode);
+		return -ENODEV;
+	}
+}
+
+static const struct keembay_pcie_of_data keembay_pcie_rc_of_data = {
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct keembay_pcie_of_data keembay_pcie_ep_of_data = {
+	.mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct of_device_id keembay_pcie_of_match[] = {
+	{
+		.compatible = "intel,keembay-pcie",
+		.data = &keembay_pcie_rc_of_data,
+	},
+	{
+		.compatible = "intel,keembay-pcie-ep",
+		.data = &keembay_pcie_ep_of_data,
+	},
+	{}
+};
+
+static struct platform_driver keembay_pcie_driver = {
+	.driver = {
+		.name = "keembay-pcie",
+		.of_match_table = keembay_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe  = keembay_pcie_probe,
+};
+builtin_platform_driver(keembay_pcie_driver);
--
2.17.1