[PATCH 04/13] ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 ADX Device Tree Bindings
+
+description: |
+  The Audio Demultiplexer (ADX) block takes an input stream with   up to
+  16 channels and demultiplexes it into four output streams of up to 16
+  channels each. A byte RAM helps to form output frames by any combination
+  of bytes from the input frame. Its design is identical to that of byte
+  RAM in the AMX except that the data flow direction is reversed.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^adx@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-adx
+      - items:
+          - enum:
+              - nvidia,tegra194-adx
+              - nvidia,tegra186-adx
+          - const: nvidia,tegra210-adx
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^ADX[1-9]$"
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      used as prefix for sink/source names of the component. Must be a
+      unique string among multiple instances of the same component.
+      The name can be "ADX1" or "ADX2" ... "ADXx", where x depends on
+      the maximum available instances on a Tegra SoC.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      ADX has one input and four output. Accordingly ACIF (Audio Client
+      Interface) RX and TX port nodes are defined to represent ADX inputs
+      and output respectively. These are connected to corresponding ports
+      on AHUB.
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    adx@702d3800 {
+        compatible = "nvidia,tegra210-adx";
+        reg = <0x702d3800 0x100>;
+        sound-name-prefix = "ADX1";
+    };
+
+...

@@ -85,6 +85,26 @@ patternProperties:
     type: object
     $ref: nvidia,tegra186-dspk.yaml#
 
+  '^mvc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mvc.yaml#
+
+  '^sfc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-sfc.yaml#
+
+  '^amx@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-amx.yaml#
+
+  '^adx@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-adx.yaml#
+
+  '^mixer@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mixer.yaml#
+
 required:
   - compatible
   - reg

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-amx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 AMX Device Tree Bindings
+
+description: |
+  The Audio Multiplexer (AMX) block can multiplex up to four input streams
+  each of which can have maximum 16 channels and generate an output stream
+  with maximum 16 channels. A byte RAM helps to form an output frame by
+  any combination of bytes from the input frames.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^amx@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-amx
+      - items:
+          - const: nvidia,tegra186-amx
+          - const: nvidia,tegra210-amx
+      - const: nvidia,tegra194-amx
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^AMX[1-9]$"
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      used as prefix for sink/source names of the component. Must be a
+      unique string among multiple instances of the same component.
+      The name can be "AMX1" or "AMX2" ... "AMXx", where x depends on
+      the maximum available instances on a Tegra SoC.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      AMX has four inputs and one output. Accordingly ACIF (Audio Client
+      Interfaces) RX and TX port nodes are defined to represent AMX inputs
+      and output respectively. These are connected to corresponding ports
+      on AHUB.
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    amx@702d3000 {
+        compatible = "nvidia,tegra210-amx";
+        reg = <0x702d3000 0x100>;
+        sound-name-prefix = "AMX1";
+    };
+
+...

@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 Mixer Device Tree Bindings
+
+description: |
+  The Mixer supports mixing of up to ten 7.1 audio input streams and
+  generate five outputs (each of which can be any combination of the
+  ten input streams).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mixer@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-amixer
+      - items:
+          - enum:
+              - nvidia,tegra194-amixer
+              - nvidia,tegra186-amixer
+          - const: nvidia,tegra210-amixer
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    const: "MIXER"
+    $ref: /schemas/types.yaml#/definitions/string
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Mixer has ten inputs and five outputs. Accordingly ACIF (Audio Client
+      Interfaces) RX and TX port nodes are defined to represent MIXER inputs
+      and outputs respectively. These are connected to corresponding ports
+      on AHUB.
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    mixer@702dbb00 {
+        compatible = "nvidia,tegra210-amixer";
+        reg = <0x702dbb00 0x800>;
+        sound-name-prefix = "MIXER";
+    };
+
+...

@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MVC Device Tree Bindings
+
+description: |
+  The Master Volume Control (MVC) provides gain or attenuation to a digital
+  signal path. It can be used in input or output signal path for per-stream
+  volume control or it can be used as master volume control. The MVC block
+  has one input and one output. The input digital stream can be mono or
+  multi-channel (up to 7.1 channels) stream. An independent mute control is
+  also included in the MVC block.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mvc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-mvc
+      - items:
+          - enum:
+              - nvidia,tegra194-mvc
+              - nvidia,tegra186-mvc
+          - const: nvidia,tegra210-mvc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^MVC[1-9]$"
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      used as prefix for sink/source names of the component. Must be a
+      unique string among multiple instances of the same component.
+      The name can be "MVC1" or "MVC2" ... "MVCx", where x depends on
+      the maximum available instances on a Tegra SoC.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          ACIF (Audio Client Interface) acting as MVC input (RX) port.
+          This is connected to corresponding ACIF port on AHUB.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          ACIF (Audio Client Interface) acting as MVC output (TX) port.
+          This is connected to corresponding ACIF port on AHUB.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    mvc@702da000 {
+        compatible = "nvidia,tegra210-mvc";
+        reg = <0x702da000 0x200>;
+        sound-name-prefix = "MVC1";
+    };
+
+...

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 SFC Device Tree Bindings
+
+description: |
+  The Sampling Frequency Converter (SFC) converts the sampling frequency
+  of the input signal from one frequency to another. It supports sampling
+  frequency conversions of streams of up to two channels (stereo).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^sfc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-sfc
+      - items:
+          - enum:
+              - nvidia,tegra194-sfc
+              - nvidia,tegra186-sfc
+          - const: nvidia,tegra210-sfc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^SFC[1-9]$"
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      used as prefix for sink/source names of the component. Must be a
+      unique string among multiple instances of the same component.
+      The name can be "SFC1" or "SFC2" ... "SFCx", where x depends on
+      the maximum available instances on a Tegra SoC.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          ACIF (Audio Client Interface) acting as SFC input (RX) port.
+          This is connected to corresponding ACIF port on AHUB.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          ACIF (Audio Client Interface) acting as SFC output (TX) port.
+          This is connected to corresponding ACIF port on AHUB.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    sfc@702d2000 {
+        compatible = "nvidia,tegra210-sfc";
+        reg = <0x702d2000 0x200>;
+        sound-name-prefix = "SFC1";
+    };
+
+...