Re: [PATCH] ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
Date: 2021-08-26 14:50:23
Also in:
linux-arm-kernel, lkml
On 26.08.21 16:45, Grzegorz Szymaszek wrote:
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. The DCMI pins used on this output are defined in the pin state definition &pinctrl/dcmi-1, AKA &dcmi_pins_b (added in mainline commit 02814a41529a55dbfb9fbb2a3728e78e70646ea6). Set these pins as the default pinctrl of the DCMI peripheral in the board device tree. The pins are not used for any other purpose, so it seems safe to assume most users will not need to override (delete) what this patch provides. status defaults to "disabled", so the peripheral will not be unnecessarily started. And the users who actually intend to make use of a camera on the DVP port will have this little part of the configuration ready. Signed-off-by: Grzegorz Szymaszek <redacted>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/stm32mp157c-odyssey.dts | 6 ++++++ 1 file changed, 6 insertions(+)diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts index be1dd5e9e744..554f5d3bcdc3 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts@@ -22,6 +22,12 @@ chosen { }; }; +&dcmi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_b>; + pinctrl-1 = <&dcmi_sleep_pins_b>; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>;
-- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |