[PATCH v3 4/7] arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
From: Enric Balletbo i Serra <hidden>
Date: 2021-08-25 10:27:00
Also in:
linux-arm-kernel, linux-mediatek, lkml
Subsystem:
arm/mediatek soc support, open firmware and flattened device tree bindings, reset controller framework, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Philipp Zabel, Linus Torvalds
Reset the DSI hardware is needed to prevent different settings between the bootloader and the kernel. Signed-off-by: Enric Balletbo i Serra <redacted> Acked-by: Rob Herring <robh@kernel.org> --- (no changes since v1) arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 ++ include/dt-bindings/reset/mt8173-resets.h | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 17d70e2f5394..97ea3f9960b1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi@@ -1036,6 +1036,7 @@ mmsys: syscon@14000000 { assigned-clocks = <&topckgen CLK_TOP_MM_SEL>; assigned-clock-rates = <400000000>; #clock-cells = <1>; + #reset-cells = <1>; mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, <&gce 1 CMDQ_THR_PRIO_HIGHEST>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1262,6 +1263,7 @@ dsi0: dsi@1401b000 { <&mmsys CLK_MM_DSI0_DIGITAL>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; status = "disabled";
diff --git a/include/dt-bindings/reset/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h
index ba8636eda5ae..6a60c7cecc4c 100644
--- a/include/dt-bindings/reset/mt8173-resets.h
+++ b/include/dt-bindings/reset/mt8173-resets.h@@ -27,6 +27,8 @@ #define MT8173_INFRA_GCE_FAXI_RST 40 #define MT8173_INFRA_MMIOMMURST 47 +/* MMSYS resets */ +#define MT8173_MMSYS_SW0_RST_B_DISP_DSI0 25 /* PERICFG resets */ #define MT8173_PERI_UART0_SW_RST 0
--
2.30.2