[PATCH v2 1/2] PCI: dwc: Perform host_init() before registering msi

On the Qualcomm sc8180x platform the bootloader does something related
to PCI that leaves a pending "msi" interrupt, which with the current
ordering often fires before init has a chance to enable the clocks that
are necessary for the interrupt handler to access the hardware.

Move the host_init() call before the registration of the "msi" interrupt
handler to ensure the host driver has a chance to enable the clocks.

The assignment of the bridge's ops and child_ops is moved along, because
at least the TI Keystone driver overwrites these in its host_init
callback.

Signed-off-by: Bjorn Andersson <redacted>
---

Changes since v1:
- New patch, instead of enabling resources in the qcom driver before jumping to
  dw_pcie_host_init(), per Rob Herring's suggestion.

 .../pci/controller/dwc/pcie-designware-host.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index d1d9b8344ec9..f4755f3a03be 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c

@@ -335,6 +335,16 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	if (pci->link_gen < 1)
 		pci->link_gen = of_pci_get_max_link_speed(np);
 
+	/* Set default bus ops */
+	bridge->ops = &dw_pcie_ops;
+	bridge->child_ops = &dw_child_pcie_ops;
+
+	if (pp->ops->host_init) {
+		ret = pp->ops->host_init(pp);
+		if (ret)
+			return ret;
+	}
+
 	if (pci_msi_enabled()) {
 		pp->has_msi_ctrl = !(pp->ops->msi_host_init ||
 				     of_property_read_bool(np, "msi-parent") ||

@@ -388,15 +398,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		}
 	}
 
-	/* Set default bus ops */
-	bridge->ops = &dw_pcie_ops;
-	bridge->child_ops = &dw_child_pcie_ops;
-
-	if (pp->ops->host_init) {
-		ret = pp->ops->host_init(pp);
-		if (ret)
-			goto err_free_msi;
-	}
 	dw_pcie_iatu_detect(pci);
 
 	dw_pcie_setup_rc(pp);

-- 
2.29.2