[RFC PATCH v3 net-next 04/10] net: dsa: ocelot: felix: Remove requirement for PCS in felix devices
flat view
STALE1880d
SUPERSEDED
From: Colin Foster <colin.foster@in-advantage.com>
Date: 2021-08-14 02:50:39
Also in:
lkml, netdev
Subsystem:
networking drivers, networking [dsa], ocelot ethernet switch driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Vladimir Oltean, Linus Torvalds
Revision v3 of 2 in this series.
Revisions (2)
- v3 current
- v4 [diff vs current]
Existing felix devices all have an initialized pcs array. Future devices might not, so running a NULL check on the array before dereferencing it will allow those future drivers to not crash at this point Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- drivers/net/dsa/ocelot/felix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index ce607fbaaa3a..74ae322b2126 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c@@ -852,7 +852,7 @@ static void felix_phylink_mac_config(struct dsa_switch *ds, int port, struct felix *felix = ocelot_to_felix(ocelot); struct dsa_port *dp = dsa_to_port(ds, port); - if (felix->pcs[port]) + if (felix->pcs && felix->pcs[port]) phylink_set_pcs(dp->pl, &felix->pcs[port]->pcs); }
--
2.25.1