Re: [PATCH] arm64: zynqmp: Remove not documented is-dual property
flat view
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: 2021-08-09 01:52:18
Also in:
linux-arm-kernel, lkml
Hi Michal, Thank you for the patch. On Fri, Aug 06, 2021 at 10:42:29AM +0200, Michal Simek wrote:
Remove is-dual not documented property and also update comment about QSPI sizes to reflect dual configuration as 16MB + 16MB. Only single configuration is supported now. Reported-by: Quanyang Wang <redacted> Signed-off-by: Michal Simek <redacted>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
quoted hunk ↗ jump to hunk
--- arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 3 +-- arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 3 +-- arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 3 +-- 3 files changed, 3 insertions(+), 6 deletions(-)diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index becfc23a5610..3d8d14ef1ede 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts@@ -937,9 +937,8 @@ &psgtr { &qspi { status = "okay"; - is-dual = <1>; flash@0 { - compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ #address-cells = <1>; #size-cells = <1>; reg = <0x0>;diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index d2219373580a..057c04352591 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts@@ -931,9 +931,8 @@ &psgtr { &qspi { status = "okay"; - is-dual = <1>; flash@0 { - compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ #address-cells = <1>; #size-cells = <1>; reg = <0x0>;diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index dac5ba67a160..e1fff62a4cd5 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts@@ -773,9 +773,8 @@ &psgtr { &qspi { status = "okay"; - is-dual = <1>; flash@0 { - compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ #address-cells = <1>; #size-cells = <1>; reg = <0x0>;
-- Regards, Laurent Pinchart