Re: [PATCH v8 2/3] iio: accel: Add driver support for ADXL355
flat view
From: Jonathan Cameron <jic23@kernel.org>
Date: 2021-08-08 15:02:05
Also in:
linux-iio, lkml
On Wed, 4 Aug 2021 19:33:08 +0530 Puranjay Mohan [off-list ref] wrote:
ADXL355 is 3-axis MEMS Accelerometer. It offers low noise density, low 0g offset drift, low power with selectable measurement ranges. It also features programmable high-pass and low-pass filters. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf Signed-off-by: Puranjay Mohan <redacted>
Hi Puranjay, One comment below, but it's a follow up on a discussion going on in the ADXL313 driver review. I might just make that change whilst applying this, or leave it for another day. Either way, no need for you to change anything unless you are doing a v9 for another reason. ...
quoted hunk ↗ jump to hunk
+ +/* + * The datasheet defines an intercept of 1885 LSB at 25 degC + * and a slope of -9.05 LSB/C. The following formula can be used to find the + * temperature: + * Temp = ((RAW - 1885)/(-9.05)) + 25 but this doesn't follow the format of + * the IIO which is Temp = (RAW + OFFSET) * SCALE. Hence using some rearranging + * we get the scale as -110.49723 and offset as -2111.25 + */ +#define TEMP_SCALE_VAL -110 +#define TEMP_SCALE_VAL2 497238 +#define TEMP_OFFSET_VAL -2111 +#define TEMP_OFFSET_VAL2 250000 + +/* + * At +/- 2g with 20-bit resolution, scale is given in datasheet as + * 3.9ug/LSB = 0.0000039 * 9.80665 = 0.00003824593 m/s^2 + */ +#define ADXL355_NSCALE 38245
This just came up in another review and wasn't something I've been picking up on in reviews before now. These scale defines would be better dropped and the values moved inline (along with the comments). It avoids possible unit misunderstandings etc In short the key thing is, sometimes a number is just a number and using a define to give it a name is not always helpful, particularly if it's only used in one place in the code.