Re: [PATCH 3/5] ARM: dts: Add basic support for EcoNet EN7523
From: Rob Herring <robh@kernel.org>
Date: 2021-08-06 20:52:48
Also in:
linux-arm-kernel, lkml
On Fri, Jul 30, 2021 at 03:59:01PM +0100, Mark Rutland wrote:
On Fri, Jul 30, 2021 at 03:45:50PM +0200, Bert Vermeulen wrote:quoted
From: John Crispin <john@phrozen.org> Add basic support for EcoNet EN7523, enough for booting to console. The UART is basically 8250-compatible, except for the clock selection. A clock-frequency value is synthesized to get this to run at 115200 bps. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Bert Vermeulen <redacted> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/en7523-evb.dts | 17 ++++ arch/arm/boot/dts/en7523.dtsi | 128 +++++++++++++++++++++++++++++++ 3 files changed, 147 insertions(+) create mode 100644 arch/arm/boot/dts/en7523-evb.dts create mode 100644 arch/arm/boot/dts/en7523.dtsiquoted
+ cpus { + #address-cells = <1>; + #size-cells = <0>;quoted
+ cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&L2_0>; + + };quoted
+ gic: interrupt-controller@09000000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x09000000 0x20000>, + <0x09080000 0x80000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + + its: gic-its@09020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cell = <1>;Missing 's' here for '#msi-cells'.
No need for a human to be checking this, the DT schemas will check this. Please run 'make dtbs_checks' on this. New platforms should be free of warnings ideally. Rob