Re: [PATCH 1/4] arm64: dts: qcom: sc7280: add IPA information

Add IPA-related nodes and definitions to "sc7280.dtsi", including
the reserved memory area used for AP-based IPA firmware loading.

Signed-off-by: Alex Elder <redacted>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 42 ++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 029723a75edef..5764c5b5cae17 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -69,6 +69,11 @@ cpucp_mem: memory@80b00000 {
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
+
+		ipa_fw_mem: memory@8b700000 {
+			reg = <0 0x8b700000 0 0x10000>;
+			no-map;
+		};
 	};
 
 	cpus {

@@ -568,6 +573,43 @@ mmss_noc: interconnect@1740000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sc7280-ipa";
+
+			iommus = <&apps_smmu 0x480 0x0>,
+				 <&apps_smmu 0x482 0x0>;
+			reg = <0 0x1e40000 0 0x8000>,
+			      <0 0x1e50000 0 0x4ad0>,
+			      <0 0x1e04000 0 0x23000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,

+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+