[PATCH v34 0/3] Mainline imx6 based SKOV boards

changes v4:
- add vref-supply to adc@0
- split gpio assignment for the mdio node

changes v3:
- drop panel bindings patches, it is already in drm-misc-next
- remove some new lines
- reorder compatibles at the start of the nodes
- use lowercase for hex value
- add enable-active-high to the regulator-vcc-mmc-io and fix MMC voltage
  configuration.

changes v2:
- remove unnecessary newlines.
- change linux,wakeup to wakeup-source
- change switch@3 unit-address to @0
- sort aliases alphabetically

Mainline imx6 based DTs for SKOV A/S boards

Oleksij Rempel (2):
  dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
  dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards

Sam Ravnborg (1):
  ARM: dts: add SKOV imx6q and imx6dl based boards

 .../devicetree/bindings/arm/fsl.yaml          |   5 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   5 +
 arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts    |  13 +
 arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts    | 106 ++++
 arch/arm/boot/dts/imx6q-skov-revc-lt2.dts     |  36 ++
 arch/arm/boot/dts/imx6q-skov-revc-lt6.dts     | 128 +++++
 .../dts/imx6q-skov-reve-mi1010ait-1cp1.dts    | 127 +++++
 arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi  |  54 ++
 arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi       | 477 ++++++++++++++++++
 10 files changed, 953 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
 create mode 100644 arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi

-- 
2.30.2