[PATCH v3 4/5] ARM: dts: qcom: pm8941: Add nodes for QCOM SPMI Flash LEDs
From: Nícolas F. R. A. Prado <hidden>
Date: 2021-08-03 16:27:30
Also in:
linux-arm-kernel, linux-arm-msm, linux-leds, lkml, phone-devel
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add nodes for Qualcomm's SPMI Flash LEDs present in PM8941. There are two white LEDs which can be used as flash or torch. Signed-off-by: Nícolas F. R. A. Prado <redacted> --- Changes in v3: - Disabled node - Removed LED configuration (moved to hammerhead dts in patch 5) Changes in v2: - Moved from hammerhead dts to pm8941 dtsi, as it was this way downstream - Now using values from leds-qcom-spmi-flash.h arch/arm/boot/dts/qcom-pm8941.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index c1f2012d1c8b..e9e4369a488b 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi@@ -2,6 +2,7 @@ #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/leds/common.h> &spmi_bus {
@@ -189,5 +190,29 @@ pm8941_5vs2: 5vs2 { regulator-initial-mode = <1>; }; }; + + spmi-flash-leds@d300 { + status = "disabled"; + + compatible = "qcom,spmi-flash-leds"; + reg = <0xd300 0x100>; + flash-boost-supply = <&pm8941_5vs1>; + torch-boost-supply = <&pm8941_5v>; + + #address-cells = <1>; + #size-cells = <0>; + + pm8941_flash0: led@0 { + reg = <0>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + }; + + pm8941_flash1: led@1 { + reg = <1>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + }; + }; }; };
--
2.32.0