[PATCHv8 1/3] dt-bindings: misc: ge-achc: Convert to DT schema format
From: Sebastian Reichel <hidden>
Date: 2021-08-02 17:23:24
Also in:
linux-spi, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Convert the binding to DT schema format. Also update the binding to fix shortcomings * Add "nxp,kinetis-k20" fallback compatible * add programming SPI interface and reset GPIO * add main clock * add voltage supplies * drop spi-max-frequency from required properties, driver will setup max. frequency Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <redacted> --- .../devicetree/bindings/misc/ge-achc.txt | 26 -------- .../devicetree/bindings/misc/ge-achc.yaml | 65 +++++++++++++++++++ 2 files changed, 65 insertions(+), 26 deletions(-) delete mode 100644 Documentation/devicetree/bindings/misc/ge-achc.txt create mode 100644 Documentation/devicetree/bindings/misc/ge-achc.yaml
diff --git a/Documentation/devicetree/bindings/misc/ge-achc.txt b/Documentation/devicetree/bindings/misc/ge-achc.txt
deleted file mode 100644
index 77df94d7a32f..000000000000
--- a/Documentation/devicetree/bindings/misc/ge-achc.txt
+++ /dev/null@@ -1,26 +0,0 @@ -* GE Healthcare USB Management Controller - -A device which handles data aquisition from compatible USB based peripherals. -SPI is used for device management. - -Note: This device does not expose the peripherals as USB devices. - -Required properties: - -- compatible : Should be "ge,achc" - -Required SPI properties: - -- reg : Should be address of the device chip select within - the controller. - -- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be - 1MHz for the GE ACHC. - -Example: - -spidev0: spi@0 { - compatible = "ge,achc"; - reg = <0>; - spi-max-frequency = <1000000>; -};
diff --git a/Documentation/devicetree/bindings/misc/ge-achc.yaml b/Documentation/devicetree/bindings/misc/ge-achc.yaml
new file mode 100644
index 000000000000..ff07aa62ed57
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ge-achc.yaml@@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright (C) 2021 GE Inc. +# Copyright (C) 2021 Collabora Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/ge-achc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GE Healthcare USB Management Controller + +description: | + A device which handles data acquisition from compatible USB based peripherals. + SPI is used for device management. + + Note: This device does not expose the peripherals as USB devices. + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + compatible: + items: + - const: ge,achc + - const: nxp,kinetis-k20 + + clocks: + maxItems: 1 + + vdd-supply: + description: Digital power supply regulator on VDD pin + + vdda-supply: + description: Analog power supply regulator on VDDA pin + + reg: + items: + - description: Control interface + - description: Firmware programming interface + + reset-gpios: + description: GPIO used for hardware reset. + maxItems: 1 + +required: + - compatible + - clocks + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + spi@1 { + compatible = "ge,achc", "nxp,kinetis-k20"; + reg = <1>, <0>; + clocks = <&achc_24M>; + reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + }; + };
--
2.30.2