Re: [PATCH v7 2/6] thermal: sy7636a: Add thermal driver for sy7636a

On Wed, 28 Jul 2021, Alistair Francis wrote:

On Wed, Jul 21, 2021 at 1:02 AM Lee Jones [off-list ref] wrote:

quoted

On Thu, 08 Jul 2021, Alistair Francis wrote:

quoted

From: Lars Ivar Miljeteig <redacted>

Add thermal driver to enable kernel based polling
and shutdown of device for temperatures out of spec

Signed-off-by: Alistair Francis <redacted>
---
 drivers/thermal/Kconfig           |   7 ++
 drivers/thermal/Makefile          |   1 +
 drivers/thermal/sy7636a_thermal.c | 107 ++++++++++++++++++++++++++++++
 3 files changed, 115 insertions(+)
 create mode 100644 drivers/thermal/sy7636a_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index d7f44deab5b1..7112c63d9021 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig

@@ -450,6 +450,13 @@ depends on (ARCH_STI || ARCH_STM32) && OF
 source "drivers/thermal/st/Kconfig"
 endmenu

+config SY7636A_THERMAL
+     tristate "SY7636A thermal management"
+     depends on MFD_SY7636A
+     help
+       Enable the sy7636a thermal driver, which supports the
+       temperature sensor embedded in Silabs SY7636A chip.
+
 source "drivers/thermal/tegra/Kconfig"

 config GENERIC_ADC_THERMAL

diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 82fc3e616e54..2e1aca8a0a09 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_DA9062_THERMAL)        += da9062-thermal.o
 obj-y                                += intel/
 obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
 obj-y                                += st/
+obj-$(CONFIG_SY7636A_THERMAL)        += sy7636a_thermal.o
 obj-$(CONFIG_QCOM_TSENS)     += qcom/
 obj-y                                += tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o

diff --git a/drivers/thermal/sy7636a_thermal.c b/drivers/thermal/sy7636a_thermal.c
new file mode 100644
index 000000000000..705a16fb1045
--- /dev/null
+++ b/drivers/thermal/sy7636a_thermal.c

@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Functions to access SY3686A power management chip temperature
+//
+// Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+//
+// Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+//          Alistair Francis <alistair@alistair23.me>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include <linux/mfd/sy7636a.h>
+
+struct sy7636a_data {
+     struct sy7636a *sy7636a;
+     struct thermal_zone_device *thermal_zone_dev;
+};
+
+static int sy7636a_get_temp(void *arg, int *res)
+{
+     unsigned int reg_val, mode_ctr;
+     int ret;
+     struct sy7636a_data *data = arg;
+     bool isVoltageActive;
+
+     ret = regmap_read(data->sy7636a->regmap,
+                     SY7636A_REG_OPERATION_MODE_CRL, &mode_ctr);
+     if (ret)
+             return ret;
+
+     isVoltageActive = mode_ctr & SY7636A_OPERATION_MODE_CRL_ONOFF;
+
+     if (!isVoltageActive) {
+             ret = regmap_write(data->sy7636a->regmap,
+                             SY7636A_REG_OPERATION_MODE_CRL,
+                             mode_ctr | SY7636A_OPERATION_MODE_CRL_ONOFF);
+             if (ret)
+                     return ret;
+     }
+
+     ret = regmap_read(data->sy7636a->regmap,
+                     SY7636A_REG_TERMISTOR_READOUT, &reg_val);
+     if (ret)
+             return ret;
+
+     if (!isVoltageActive) {
+             ret = regmap_write(data->sy7636a->regmap,
+                             SY7636A_REG_OPERATION_MODE_CRL,
+                             mode_ctr);
+             if (ret)
+                     return ret;
+     }
+
+     *res = *((signed char*)&reg_val);
+     *res *= 1000;
+
+     return ret;
+}
+
+static const struct thermal_zone_of_device_ops ops = {
+     .get_temp       = sy7636a_get_temp,
+};
+
+static int sy7636a_thermal_probe(struct platform_device *pdev)
+{
+     struct sy7636a *sy7636a = dev_get_drvdata(pdev->dev.parent);
+     struct sy7636a_data *data;
+
+     if (!sy7636a)
+             return -EPROBE_DEFER;

How is this possible?

I'm not sure, I have removed this.

quoted

quoted

+     data = devm_kzalloc(&pdev->dev, sizeof(struct sy7636a_data), GFP_KERNEL);

sizeof(*data)

quoted

+     if (!data)
+             return -ENOMEM;
+
+     platform_set_drvdata(pdev, data);
+
+     data->sy7636a = sy7636a;
+     data->thermal_zone_dev = devm_thermal_zone_of_sensor_register(
+                     pdev->dev.parent,
+                     0,
+                     data,

Why don't you just pass in your initial ddata?

I'm not sure what you mean, which data?

sy7636a

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog