Re: [PATCH v2 1/2] rtc: rx8025: implement RX-8035 support
From: Nobuhiro Iwamatsu <hidden>
Date: 2021-07-19 09:16:27
Also in:
linux-rtc
Hi, 2021年7月9日(金) 13:45 Mathew McBride [off-list ref]:
The RX-8035 is a newer RTC from EPSON that is very similar to the RX-8025. The key difference is in the oscillation stop (XSTP) bit which is inverted on the RX-8035. Signed-off-by: Mathew McBride <redacted>
Reviewed- by: Nobuhiro Iwamatsu [off-list ref] Best regards, Nobuhiro
quoted hunk ↗ jump to hunk
--- drivers/rtc/rtc-rx8025.c | 58 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 5 deletions(-)diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index c914091819ba..7a0258fe4b8e 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c@@ -60,14 +60,23 @@ #define RX8025_ADJ_DATA_MAX 62 #define RX8025_ADJ_DATA_MIN -62 +enum rx_model { + model_rx_unknown, + model_rx_8025, + model_rx_8035, + model_last +}; + static const struct i2c_device_id rx8025_id[] = { - { "rx8025", 0 }, + { "rx8025", model_rx_8025 }, + { "rx8035", model_rx_8035 }, { } }; MODULE_DEVICE_TABLE(i2c, rx8025_id); struct rx8025_data { struct rtc_device *rtc; + enum rx_model model; u8 ctrl1; };@@ -100,10 +109,26 @@ static s32 rx8025_write_regs(const struct i2c_client *client, length, values); } +static int rx8025_is_osc_stopped(enum rx_model model, int ctrl2) +{ + int xstp = ctrl2 & RX8025_BIT_CTRL2_XST; + /* XSTP bit has different polarity on RX-8025 vs RX-8035. + * RX-8025: 0 == oscillator stopped + * RX-8035: 1 == oscillator stopped + */ + + if (model == model_rx_8025) + xstp = !xstp; + + return xstp; +} + static int rx8025_check_validity(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); + struct rx8025_data *drvdata = dev_get_drvdata(dev); int ctrl2; + int xstp; ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2); if (ctrl2 < 0)@@ -117,7 +142,8 @@ static int rx8025_check_validity(struct device *dev) return -EINVAL; } - if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) { + xstp = rx8025_is_osc_stopped(drvdata->model, ctrl2); + if (xstp) { dev_warn(dev, "crystal stopped, date is invalid\n"); return -EINVAL; }@@ -127,6 +153,7 @@ static int rx8025_check_validity(struct device *dev) static int rx8025_reset_validity(struct i2c_client *client) { + struct rx8025_data *drvdata = i2c_get_clientdata(client); int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2); if (ctrl2 < 0)@@ -134,22 +161,28 @@ static int rx8025_reset_validity(struct i2c_client *client) ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET); + if (drvdata->model == model_rx_8025) + ctrl2 |= RX8025_BIT_CTRL2_XST; + else + ctrl2 &= ~(RX8025_BIT_CTRL2_XST); + return rx8025_write_reg(client, RX8025_REG_CTRL2, - ctrl2 | RX8025_BIT_CTRL2_XST); + ctrl2); } static irqreturn_t rx8025_handle_irq(int irq, void *dev_id) { struct i2c_client *client = dev_id; struct rx8025_data *rx8025 = i2c_get_clientdata(client); - int status; + int status, xstp; rtc_lock(rx8025->rtc); status = rx8025_read_reg(client, RX8025_REG_CTRL2); if (status < 0) goto out; - if (!(status & RX8025_BIT_CTRL2_XST)) + xstp = rx8025_is_osc_stopped(rx8025->model, status); + if (xstp) dev_warn(&client->dev, "Oscillation stop was detected," "you may have to readjust the clock\n");@@ -519,6 +552,21 @@ static int rx8025_probe(struct i2c_client *client, i2c_set_clientdata(client, rx8025); + if (id) { + rx8025->model = id->driver_data; + switch (rx8025->model) { + case model_rx_8025: + dev_info(&client->dev, "Model RX-8025"); + break; + case model_rx_8035: + dev_info(&client->dev, "Model RX-8035"); + break; + default: + dev_warn(&client->dev, "Unknown model: %d\n", rx8025->model); + break; + } + } + err = rx8025_init_client(client); if (err) return err; --2.30.1
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org}
GPG ID: 40AD1FA6