[PATCH v5 4/4] arm64: dts: ipq6018: add pwm node
From: Baruch Siach <baruch@tkos.co.il>
Date: 2021-07-13 11:35:57
Also in:
linux-arm-kernel, linux-arm-msm, linux-pwm
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Describe the PWM block on IPQ6018. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring) --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 72ac36c1be57..06b6676097e8 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi@@ -355,6 +355,15 @@ i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */ status = "disabled"; }; + pwm: pwm { + #pwm-cells = <2>; + compatible = "qcom,ipq6018-pwm"; + qcom,pwm-regs = <&tcsr_q6 0xa010>; + clocks = <&gcc GCC_ADSS_PWM_CLK>; + clock-names = "core"; + status = "disabled"; + }; + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07984000 0x0 0x1a000>;
--
2.30.2