Thread (15 messages) 15 messages, 5 authors, 2021-08-06

Re: [PATCH v2 2/4] clk: qcom: a53pll/mux: Use unique clock name

From: Shawn Guo <hidden>
Date: 2021-07-10 07:35:02
Also in: linux-arm-msm, linux-clk

On Sat, Jul 10, 2021 at 12:17:33AM -0500, Bjorn Andersson wrote:
On Sat 03 Jul 21:40 CDT 2021, Shawn Guo wrote:
quoted
Different from MSM8916 which has only one a53pll/mux clock, MSM8939 gets
three for Cluster0 (little cores), Cluster1 (big cores) and CCI (Cache
Coherent Interconnect).  That said, a53pll/mux clock needs to be named
uniquely.  Append @unit-address of device node to the clock name, so
that a53pll/mux will be named like below on MSM8939.

  a53pll@b016000
  a53pll@b116000
  a53pll@b1d0000

  a53mux@b1d1000
  a53mux@b011000
  a53mux@b111000

Signed-off-by: Shawn Guo <redacted>
---
 drivers/clk/qcom/a53-pll.c      | 8 +++++++-
 drivers/clk/qcom/apcs-msm8916.c | 8 +++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
index d6756bd777ce..96a118be912d 100644
--- a/drivers/clk/qcom/a53-pll.c
+++ b/drivers/clk/qcom/a53-pll.c
@@ -37,6 +37,7 @@ static const struct regmap_config a53pll_regmap_config = {
 static int qcom_a53pll_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
 	struct regmap *regmap;
 	struct resource *res;
 	struct clk_pll *pll;
@@ -66,7 +67,12 @@ static int qcom_a53pll_probe(struct platform_device *pdev)
 	pll->status_bit = 16;
 	pll->freq_tbl = a53pll_freq;
 
-	init.name = "a53pll";
+	/* Use an unique name by appending @unit-address */
+	init.name = devm_kasprintf(dev, GFP_KERNEL, "a53pll%s",
+				   strchrnul(np->full_name, '@'));
While the result is nice, this isn't...

Is your dev_name() reasonable? What about "%s:a53pll", dev_name(dev) ?
dev_name() is somehow reasonable for a53pll.

  b016000.clock-controller:a53pll
  b116000.clock-controller:a53pll
  b1d0000.clock-controller:a53pll

But I prefer to the existing names, because I would like to use the same
naming schema for both a53pll and a53mux.  If using dev_name() on a53mux,
we will get the following which is less reasonable.

  qcom-apcs-msm8916-clk.1.auto:a53mux
  qcom-apcs-msm8916-clk.2.auto:a53mux
  qcom-apcs-msm8916-clk.3.auto:a53mux

Shawn
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help