[PATCH v2 1/2] ARM: dts: qcom-apq8060: Correct Ethernet node name and drop bogus irq property

make dtbs_check:

    ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$'
    ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+'

There is no "smsc,irq-active-low" property, as active low is the
default.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <redacted>
---
v2:
  - Add Reviewed-by.
---
 arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index dace8ffeb99118cb..0a4ffd10c48464f5 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts

@@ -581,7 +581,7 @@ external-bus@1a100000 {
 			 * EBI2. This has a 25MHz chrystal next to it, so no
 			 * clocking is needed.
 			 */
-			ethernet-ebi2@2,0 {
+			ethernet@2,0 {
 				compatible = "smsc,lan9221", "smsc,lan9115";
 				reg = <2 0x0 0x100>;
 				/*

@@ -598,8 +598,6 @@ ethernet-ebi2@2,0 {
 				phy-mode = "mii";
 				reg-io-width = <2>;
 				smsc,force-external-phy;
-				/* IRQ on edge falling = active low */
-				smsc,irq-active-low;
 				smsc,irq-push-pull;
 
 				/*

-- 
2.25.1