[PATCH v2 5/6] Revert "drm/panel-simple: Support for delays between GPIO & regulator"
From: Douglas Anderson <dianders@chromium.org>
Date: 2021-07-30 15:46:58
Also in:
dri-devel, linux-arm-msm, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm panel drivers, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Neil Armstrong, Linus Torvalds
This reverts commit 18a1488bf1e13fc3fc96d7948466b2166067c6c8. Those delays were added to support the Samsung ATNA33XC20 panel. However, we've moving that to its own panel driver and out of panel-simple. That means we don't need the ability to specify this delay. NOTE: it's unlikely we want to keep this delay "just in case" some other panel needs it. The enable-gpio and the power supply are really supposed to be different ways to specify the same thing: the main enable of the panel. Supporting a delay between them doesn't really make sense. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sean Paul <redacted> --- (no changes since v1) drivers/gpu/drm/panel/panel-simple.c | 28 ---------------------------- 1 file changed, 28 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index c8694f7f8e0f..ff8b59471c71 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c@@ -132,22 +132,6 @@ struct panel_desc { */ unsigned int prepare_to_enable; - /** - * @delay.power_to_enable: Time for the power to enable the display on. - * - * The time (in milliseconds) to wait after powering up the display - * before asserting its enable pin. - */ - unsigned int power_to_enable; - - /** - * @delay.disable_to_power_off: Time for the disable to power the display off. - * - * The time (in milliseconds) to wait before powering off the display - * after deasserting its enable pin. - */ - unsigned int disable_to_power_off; - /** * @delay.enable: Time for the panel to display a valid frame. *
@@ -363,10 +347,6 @@ static int panel_simple_suspend(struct device *dev) struct panel_simple *p = dev_get_drvdata(dev); gpiod_set_value_cansleep(p->enable_gpio, 0); - - if (p->desc->delay.disable_to_power_off) - msleep(p->desc->delay.disable_to_power_off); - regulator_disable(p->supply); p->unprepared_time = ktime_get();
@@ -427,9 +407,6 @@ static int panel_simple_prepare_once(struct panel_simple *p) return err; } - if (p->desc->delay.power_to_enable) - msleep(p->desc->delay.power_to_enable); - gpiod_set_value_cansleep(p->enable_gpio, 1); delay = p->desc->delay.prepare;
@@ -803,11 +780,6 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc, break; } - if (!panel->enable_gpio && desc->delay.disable_to_power_off) - dev_warn(dev, "Need a delay after disabling panel GPIO, but a GPIO wasn't provided\n"); - if (!panel->enable_gpio && desc->delay.power_to_enable) - dev_warn(dev, "Need a delay before enabling panel GPIO, but a GPIO wasn't provided\n"); - dev_set_drvdata(dev, panel); /*
--
2.32.0.554.ge1b32706d8-goog