[PATCH v3 0/4] nvmem: qfprom: Add binding updates and power-domain handling

v3:
* Dropped the description in bindings patch
* Added a patch to fix ordering in qfprom_disable_fuse_blowing()
* Fixed devm_add_action_or_reset() order

v2:
* pm_runtime calls made unconditionally, should work even without the power-domains property in DT
* Added the missing pm_runtime_disable() handling
* DT patch rebased on msm/for-next

--
qfprom devices on sc7280 have an additional requirement to vote on a power-domain
performance state to reliably blow fuses. Add the binding updates and handle this in
the driver, also add the DT node for sc7280 platform.

Rajendra Nayak (4):
  dt-bindings: nvmem: qfprom: Add optional power-domains property
  nvmem: qfprom: Fix up qfprom_disable_fuse_blowing() ordering
  nvmem: qfprom: sc7280: Handle the additional power-domains vote
  arm64: dts: qcom: sc7280: Add qfprom node

 .../devicetree/bindings/nvmem/qcom,qfprom.yaml     |  3 +++
 arch/arm64/boot/dts/qcom/sc7280.dtsi               | 13 +++++++++
 drivers/nvmem/qfprom.c                             | 31 +++++++++++++++++++---
 3 files changed, 44 insertions(+), 3 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

qfprom devices on some SoCs need to vote on the performance state
of a power-domain, so add the power-domains optional property to the
bindings

Signed-off-by: Rajendra Nayak <redacted>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 861b205..dede8892 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml

@@ -51,6 +51,9 @@ properties:
   vcc-supply:
     description: Our power supply.
 
+  power-domains:
+    maxItems: 1
+
   # Needed if any child nodes are present.
   "#address-cells":
     const: 1

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

On Fri, 30 Jul 2021 12:16:10 +0530, Rajendra Nayak wrote:

qfprom devices on some SoCs need to vote on the performance state
of a power-domain, so add the power-domains optional property to the
bindings

Signed-off-by: Rajendra Nayak <redacted>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 3 +++
 1 file changed, 3 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

On sc7280, to reliably blow fuses, we need an additional vote
on max performance state of 'MX' power-domain.
Add support for power-domain performance state voting in the
driver.

Signed-off-by: Rajendra Nayak <redacted>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 drivers/nvmem/qfprom.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index b0ca4c6..c500d62 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c

@@ -12,6 +12,8 @@
 #include <linux/mod_devicetable.h>
 #include <linux/nvmem-provider.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
 

@@ -142,6 +144,9 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
 	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
 	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
 
+	dev_pm_genpd_set_performance_state(priv->dev, 0);
+	pm_runtime_put(priv->dev);
+
 	/*
 	 * This may be a shared rail and may be able to run at a lower rate
 	 * when we're not blowing fuses.  At the moment, the regulator framework

@@ -212,6 +217,14 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
 		goto err_clk_rate_set;
 	}
 
+	ret = pm_runtime_get_sync(priv->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->dev);
+		dev_err(priv->dev, "Failed to enable power-domain\n");
+		goto err_reg_enable;
+	}
+	dev_pm_genpd_set_performance_state(priv->dev, INT_MAX);
+
 	old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
 	old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
 	writel(priv->soc_data->qfprom_blow_timer_value,

@@ -221,6 +234,8 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
 
 	return 0;
 
+err_reg_enable:
+	regulator_disable(priv->vcc);
 err_clk_rate_set:
 	clk_set_rate(priv->secclk, old->clk_rate);
 err_clk_prepared:

@@ -320,6 +335,11 @@ static int qfprom_reg_read(void *context,
 	return 0;
 }
 
+static void qfprom_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
 static const struct qfprom_soc_data qfprom_7_8_data = {
 	.accel_value = 0xD10,
 	.qfprom_blow_timer_value = 25,

@@ -420,6 +440,11 @@ static int qfprom_probe(struct platform_device *pdev)
 			econfig.reg_write = qfprom_reg_write;
 	}
 
+	pm_runtime_enable(dev);
+	ret = devm_add_action_or_reset(dev, qfprom_runtime_disable, dev);
+	if (ret)
+		return ret;
+
 	nvmem = devm_nvmem_register(dev, &econfig);
 
 	return PTR_ERR_OR_ZERO(nvmem);

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

qfprom_disable_fuse_blowing() disables a bunch of resources,
and then does a few register writes in the 'conf' address
space.
It works perhaps because the resources are needed only for the
'raw' register space writes, and that the 'conf' space allows
read/writes regardless.
However that makes the code look confusing, so just move the
register writes before turning off the resources in the
function.

Signed-off-by: Rajendra Nayak <redacted>
---
 drivers/nvmem/qfprom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 81fbad5..b0ca4c6 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c

@@ -139,6 +139,9 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
 {
 	int ret;
 
+	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
 	/*
 	 * This may be a shared rail and may be able to run at a lower rate
 	 * when we're not blowing fuses.  At the moment, the regulator framework

@@ -159,9 +162,6 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
 			 "Failed to set clock rate for disable (ignoring)\n");
 
 	clk_disable_unprepare(priv->secclk);
-
-	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
-	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
 }
 
 /**

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Hi,

On Thu, Jul 29, 2021 at 11:46 PM Rajendra Nayak [off-list ref] wrote:

I think it doesn't matter since all of these resources are just needed
for burning fuses, but I agree that what you have here makes more
logical sense and makes the function less confusing.

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Add the qfprom node and its properties for the sc7280 SoC.

Signed-off-by: Rajendra Nayak <redacted>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 029723a..e87b210 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -442,6 +442,19 @@
 			#mbox-cells = <2>;
 		};
 
+		qfprom: efuse@784000 {
+			compatible = "qcom,sc7280-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0xa20>,
+			      <0 0x00780000 0 0xa20>,
+			      <0 0x00782000 0 0x120>,
+			      <0 0x00786000 0 0x1fff>;
+			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+			clock-names = "core";
+			power-domains = <&rpmhpd SC7280_MX>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		sdhc_1: sdhci@7c4000 {
 			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
 			status = "disabled";

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

On 30/07/2021 07:46, Rajendra Nayak wrote:

v3:
* Dropped the description in bindings patch
* Added a patch to fix ordering in qfprom_disable_fuse_blowing()
* Fixed devm_add_action_or_reset() order

v2:
* pm_runtime calls made unconditionally, should work even without the power-domains property in DT
* Added the missing pm_runtime_disable() handling
* DT patch rebased on msm/for-next

--
qfprom devices on sc7280 have an additional requirement to vote on a power-domain
performance state to reliably blow fuses. Add the binding updates and handle this in
the driver, also add the DT node for sc7280 platform.

Rajendra Nayak (4):
   dt-bindings: nvmem: qfprom: Add optional power-domains property
   nvmem: qfprom: Fix up qfprom_disable_fuse_blowing() ordering
   nvmem: qfprom: sc7280: Handle the additional power-domains vote

Applied 1-3 patches.

dts patch can go via Bjorn's tree.

--srini

   arm64: dts: qcom: sc7280: Add qfprom node

  .../devicetree/bindings/nvmem/qcom,qfprom.yaml     |  3 +++
  arch/arm64/boot/dts/qcom/sc7280.dtsi               | 13 +++++++++
  drivers/nvmem/qfprom.c                             | 31 +++++++++++++++++++---
  3 files changed, 44 insertions(+), 3 deletions(-)