Thread (20 messages) 20 messages, 4 authors, 2021-08-31
STALE1734d REVIEWED: 8 (7M)
Revisions (6)
  1. v5 [diff vs current]
  2. v6 [diff vs current]
  3. v7 current
  4. v8 [diff vs current]
  5. v9 [diff vs current]
  6. v10 [diff vs current]

[PATCH v7 01/12] dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-07-30 02:53:46
Also in: dri-devel, linux-arm-kernel, linux-iommu, linux-media, linux-mediatek, lkml
Subsystem: drm drivers, drm drivers and misc gpu patches, drm drivers for mediatek, media input infrastructure (v4l/dvb), mediatek jpeg driver, open firmware and flattened device tree bindings, the rest · Maintainers: David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Chun-Kuang Hu, Philipp Zabel, Mauro Carvalho Chehab, Bin Liu, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds 

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <redacted>
---
 .../bindings/display/mediatek/mediatek,disp.txt          | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------
 Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
 .../devicetree/bindings/media/mediatek-vcodec.txt        | 4 ----
 5 files changed, 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index fbb59c9ddda6..867bd82e2f03 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -61,8 +61,6 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
@@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL0>;
 	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
 };
 
 ovl1: ovl@1400d000 {
@@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL1>;
 	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma0: rdma@1400e000 {
@@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
 	mediatek,rdma-fifosize = <8192>;
 };
 
@@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma2: rdma@14010000 {
@@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
 };
 
 wdma0: wdma@14011000 {
@@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 wdma1: wdma@14012000 {
@@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
index 9b87f036f178..052e752157b4 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -42,13 +42,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -63,7 +56,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -83,7 +75,6 @@ examples:
       clock-names = "jpgdec-smi",
                     "jpgdec";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
                <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index fcd9b829e036..8bfdfdfaba59 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -35,13 +35,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -56,7 +49,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -75,7 +67,6 @@ examples:
       clocks =  <&imgsys CLK_IMG_VENC>;
       clock-names = "jpgenc";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
                <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index ad1321e5a22d..71237355cc7e 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -13,7 +13,6 @@ Required properties:
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
 - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
@@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x16027800 0 0x800>,   /*VP8_VL*/
           <0 0x16028400 0 0x400>;   /*VP9_VD*/
     interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
     iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
              <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
              <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
              <&iommu M4U_PORT_VENC_REF_CHROMA>,
              <&iommu M4U_PORT_VENC_NBM_RDMA>,
              <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_SEL>;
     clock-names = "venc_sel";
@@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
              <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
              <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
              <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
     clock-names = "venc_lt_sel";
-- 
2.18.0
Other recent patches touching these files
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help