On Fri, Jul 23, 2021 at 03:52:39PM +0200, Clément Léger wrote:
quoted hunk ↗ jump to hunk
This patch adds documentation for the "syscon-smc" compatible which describes
a syscon using a SMC regmap instead of a MMIO one. This allows accessing system
controllers that are set as secure by using SMC handled by the secure monitor.
Signed-off-by: Clément Léger <redacted>
---
.../devicetree/bindings/mfd/syscon-smc.yaml | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/syscon-smc.yaml
diff --git a/Documentation/devicetree/bindings/mfd/syscon-smc.yaml b/Documentation/devicetree/bindings/mfd/syscon-smc.yaml
new file mode 100644
index 000000000000..6ce1392c5e7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/syscon-smc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/syscon-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Controller Registers R/W via SMC Device Tree Bindings
+
+description: |
+ System controller SMC node represents a register region containing a set
+ of miscellaneous registers accessed through a secure monitor.
+ The typical use-case is the same as the syscon one but when running with a
+ secure monitor.
+
+maintainers:
+ - Lee Jones <lee.jones@linaro.org>
+
+properties:
+ compatible:
+ anyOf:
+ - items:
+ - enum:
+ - atmel,sama5d2-sfr
+
+ - const: syscon-smc
I regret having 'syscon' as a compatible, so nak on a 2nd flavor of it.
It's only purpose is a hint to Linux to automagically create a regmap for
you.
All you need is the specific compatible, atmel,sama5d2-sfr, and you can
imply the rest of this from it. That's assuming the conclusion is a
register read/write interface on SMC is a good idea, but I don't think
it is.
Rob