[RFC PATCH 4/9] phy: phy-rockchip-inno-usb2: support #address_cells = 2
From: Peter Geis <hidden>
Date: 2021-07-28 12:26:39
Also in:
linux-arm-kernel, linux-phy, linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, generic phy framework, the rest · Maintainers:
Heiko Stuebner, Vinod Koul, Linus Torvalds
New Rockchip devices have the usb phy nodes as standalone devices. These nodes have register nodes with #address_cells = 2, but only use 32 bit addresses. Adjust the driver to check if the returned address is "0", and adjust the index in that case. Signed-off-by: Peter Geis <redacted> --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index beacac1dd253..5d2916143df7 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c@@ -1098,12 +1098,21 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) rphy->usbgrf = NULL; } - if (of_property_read_u32(np, "reg", ®)) { + if (of_property_read_u32_index(np, "reg", 0, ®)) { dev_err(dev, "the reg property is not assigned in %pOFn node\n", np); return -EINVAL; } + /* support address_cells=2 */ + if (reg == 0) { + if (of_property_read_u32_index(np, "reg", 1, ®)) { + dev_err(dev, "the reg property is not assigned in %pOFn node\n", + np); + return -EINVAL; + } + } + rphy->dev = dev; phy_cfgs = match->data; rphy->chg_state = USB_CHG_STATE_UNDEFINED;
--
2.25.1