Thread (11 messages) flat view 11 messages, 3 authors, 2021-07-26

Re: [PATCH v3 3/3] drm/panel-simple: add Gopher 2b LCD panel

From: Paul Cercueil <paul@crapouillou.net>
Date: 2021-07-26 09:02:24
Also in: dri-devel, lkml

Hi Artjom,

Le lun., juil. 26 2021 at 01:15:27 +0300, Artjom Vejsel 
[off-list ref] a écrit :
The Gopher 2b LCD panel is used in Gopher 2b handhelds.
It's simple panel with NewVision NV3047 driver, but SPI lines are not 
connected.
It has no specific name, since it's unique to that handhelds.
lot name at AliExpress: 4.3 inch 40PIN TFT LCD Screen COG NV3047 
Drive IC 480(RGB)*272 No Touch 24Bit RGB Interface
 From what I gathered the Gopher2's LCD panel is the exact same that is 
inside the RS-07 handheld. According to the teardown (in [1]), the 
RS-07 panel is a Amelin AML043056B0-40 (see [2]).

Could you verify that? According to the photos, the product code is 
written on the flexible connector.

If that's the case, instead of using the 
"qishenglong,gopher2b-lcd-panel" compatible string, could you use 
"amelin,aml043056b0-40"?

Cheers,
-Paul

[1]: https://steward-fu.github.io/website/handheld/rs07/teardown.htm
[2]: http://www.amelin.com.cn/en/h-pd-355.html
quoted hunk ↗ jump to hunk
Signed-off-by: Artjom Vejsel <redacted>
---
 drivers/gpu/drm/panel/panel-simple.c | 43 
++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c 
b/drivers/gpu/drm/panel/panel-simple.c
index 9b286bd4444f..6b69c0c70814 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3563,6 +3563,46 @@ static const struct panel_desc qd43003c0_40 = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };

+static const struct drm_display_mode 
qishenglong_gopher2b_lcd_panel_modes[] = {
+	{ /* 60 Hz */
+		.clock = 10800,
+		.hdisplay = 480,
+		.hsync_start = 480 + 77,
+		.hsync_end = 480 + 77 + 41,
+		.htotal = 480 + 77 + 41 + 2,
+		.vdisplay = 272,
+		.vsync_start = 272 + 16,
+		.vsync_end = 272 + 16 + 10,
+		.vtotal = 272 + 16 + 10 + 2,
+		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+	},
+	{ /* 50 Hz */
+		.clock = 10800,
+		.hdisplay = 480,
+		.hsync_start = 480 + 17,
+		.hsync_end = 480 + 17 + 41,
+		.htotal = 480 + 17 + 41 + 2,
+		.vdisplay = 272,
+		.vsync_start = 272 + 116,
+		.vsync_end = 272 + 116 + 10,
+		.vtotal = 272 + 116 + 10 + 2,
+		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+	},
+};
+
+static const struct panel_desc qishenglong_gopher2b_lcd_panel = {
+	.modes = qishenglong_gopher2b_lcd_panel_modes,
+	.num_modes = ARRAY_SIZE(qishenglong_gopher2b_lcd_panel_modes),
+	.bpc = 8,
+	.size = {
+		.width = 95,
+		.height = 54,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | 
DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct display_timing rocktech_rk070er9427_timing = {
 	.pixelclock = { 26400000, 33300000, 46800000 },
 	.hactive = { 800, 800, 800 },
@@ -4651,6 +4691,9 @@ static const struct of_device_id 
platform_of_match[] = {
 	}, {
 		.compatible = "qiaodian,qd43003c0-40",
 		.data = &qd43003c0_40,
+	}, {
+		.compatible = "qishenglong,gopher2b-lcd-panel",
+		.data = &qishenglong_gopher2b_lcd_panel,
 	}, {
 		.compatible = "rocktech,rk070er9427",
 		.data = &rocktech_rk070er9427,
--
2.32.0
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help