Hi,

On 08/07/2021 14:58, Martin Blumenstingl wrote:

On Mon, Jul 5, 2021 at 1:25 PM Anand Moon [off-list ref] wrote:

quoted

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.

I think there's a typo here: observer -> observe
maybe Kevin or Neil can fix this up (in this and the following two
patches) while applying the patch so you don't have to re-spin a v3

Fixed while applying !

quoted

Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT

Fixes: 524d96083b66 ("ARM: dts: meson8b: odroidc1: add the CPU voltage regulator")
Fixes: 8bdf38be712d ("ARM: dts: meson8b: odroidc1: add the VDDEE regulator")

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <redacted>

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Neil