[PATCH 5/6] iio/adc: ingenic: modify
From: citral23 <hidden>
Date: 2021-07-21 11:02:20
Also in:
linux-iio, linux-mips, lkml
Subsystem:
iio subsystem and drivers, ingenic jz47xx socs, the rest · Maintainers:
Jonathan Cameron, Paul Cercueil, Linus Torvalds
The current code does not allow to set MD to 0 to sample AUX0, fix it for the JZ4760(B). Signed-off-by: citral23 <redacted> --- drivers/iio/adc/ingenic-adc.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 618150475421..1edaae439a32 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c@@ -632,7 +632,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev, struct iio_chan_spec const *chan, int *val) { - int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY); + int cmd, ret, engine = (chan->channel == INGENIC_ADC_BATTERY); struct ingenic_adc *adc = iio_priv(iio_dev); ret = clk_enable(adc->clk);
@@ -642,11 +642,22 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev, return ret; } - /* We cannot sample AUX/AUX2 in parallel. */ + /* We cannot sample the aux channels in parallel. */ mutex_lock(&adc->aux_lock); if (adc->soc_data->has_aux_md && engine == 0) { - bit = BIT(chan->channel == INGENIC_ADC_AUX2); - ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit); + switch (chan->channel) { + case INGENIC_ADC_AUX0: + cmd = 0; + break; + case INGENIC_ADC_AUX: + cmd = 1; + break; + case INGENIC_ADC_AUX2: + cmd = 2; + break; + } + + ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, cmd); } ret = ingenic_adc_capture(adc, engine);
@@ -654,6 +665,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev, goto out; switch (chan->channel) { + case INGENIC_ADC_AUX0: case INGENIC_ADC_AUX: case INGENIC_ADC_AUX2: *val = readw(adc->base + JZ_ADC_REG_ADSDAT);
--
2.30.2