Re: [PATCH v4 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
From: Matthias Kaehlcke <mka@chromium.org>
Date: 2021-07-20 23:10:45
Also in:
linux-arm-msm, linux-remoteproc, lkml
On Tue, Jul 20, 2021 at 10:06:36AM +0530, Sibi Sankar wrote:
quoted hunk ↗ jump to hunk
The load state power-domain, used by the co-processors to notify the Always on Subsystem (AOSS) that a particular co-processor is up/down, suffers from the side-effect of changing states during suspend/resume. However the co-processors enter low-power modes independent to that of the application processor and their states are expected to remain unaltered across system suspend/resume cycles. To achieve this behavior let's drop the load state power-domain and replace them with the qmp property for all SoCs supporting low power mode signalling. Signed-off-by: Sibi Sankar <redacted> --- v4: * Commit message change and sc8180x co-processor addition. [Rob/Bjorn] .../devicetree/bindings/remoteproc/qcom,adsp.yaml | 65 +++++++++++----------- 1 file changed, 33 insertions(+), 32 deletions(-)diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml index c597ccced623..1182afb5f593 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml@@ -78,11 +78,11 @@ properties: power-domains: minItems: 1 - maxItems: 3 + maxItems: 2 power-domain-names: minItems: 1 - maxItems: 3 + maxItems: 2
It seems maxItems should have been 4 in the first place and should remain
unchanged after removing the load state power domain. With this patch:
- if:
properties:
compatible:
contains:
enum:
- qcom,sc7180-mpss-pas
then:
properties:
power-domains:
items:
- description: CX power domain
- description: MX power domain
- description: MSS power domain
power-domain-names:
items:
- const: cx
- const: mx
- const: mss