Hi,

Thanks for your review.

2021年7月15日(木) 22:18 Tom Rix [off-list ref]:

On 7/15/21 3:02 AM, Nobuhiro Iwamatsu wrote:

quoted

Convert FPGA Manager for Xilinx Zynq MPSoC bindings documentation to
YAML.

Signed-off-by: Nobuhiro Iwamatsu <redacted>
---
  .../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt   | 25 -------------
  .../bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml  | 36 +++++++++++++++++++
  2 files changed, 36 insertions(+), 25 deletions(-)
  delete mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
deleted file mode 100644
index 3052bf619dd547..00000000000000
--- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
+++ /dev/null

@@ -1,25 +0,0 @@
-Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.
-The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
-Programmable Logic (PL). The configuration uses  the firmware interface.
-
-Required properties:
-- compatible: should contain "xlnx,zynqmp-pcap-fpga"
-
-Example for full FPGA configuration:
-
-     fpga-region0 {
-             compatible = "fpga-region";
-             fpga-mgr = <&zynqmp_pcap>;
-             #address-cells = <0x1>;
-             #size-cells = <0x1>;
-     };
-
-     firmware {
-             zynqmp_firmware: zynqmp-firmware {
-                     compatible = "xlnx,zynqmp-firmware";
-                     method = "smc";
-                     zynqmp_pcap: pcap {
-                             compatible = "xlnx,zynqmp-pcap-fpga";
-                     };
-             };
-     };

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
new file mode 100644
index 00000000000000..565b835b7fbac0
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale MPSoC FPGA Manager Device Tree Bindings
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>

Needs a change to MAINTAINERS ?

My bad. I will change to correct maintainer.

quoted

+
+description: |
+  Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager.
+  The ZynqMP SoC uses the PCAP (Processor configuration Port) to

Configuration

I will update v2.

Best regards,
  Nobuhiro


-- 
Nobuhiro Iwamatsu
   iwamatsu at {nigauri.org / debian.org}
   GPG ID: 40AD1FA6